Search results

Hello, do you have the beltline strips (cat whiskers) for a 1967 Chrysler Newport convertible? Steve

second vote for aro2000

I designed and made my own solid state voltage limiter since I had parts to do so laying around. I can say that technically there is no need for that capacitor in a properly designed solid state device. It has been removed in my car and the only noise on the AM radio comes from the points...

On the radio, Ive owned 3 67 Newports. 2 of the cars I bought used years ago and they had the slide knob AM radios. the third car my dad bought new and he told me it also had the slide radio in it but he had the dealer put in a factory FM radio when he bought the car. The radio they put in is...

Hello, Would you sell the front bow of the convertible top if its any good?

Hello All, Its been awhile since I posted on this topic so i thought I would provide an update. Please see pics below. The car is painted, been put together and driven about 300 miles this summer with the top down. First mileage put on the car since 1989. Now its time for winter work. I just...

In my 67 Newport, I converted my ammeter to a voltmeter by removing the ammeter from the dashboard, gutting it and replacing the guts with a digital voltmeter of the correct dimensions that I found on ebay. I then cut a hole in the ammeter meter scale so the voltmeter would be centered on the...

Is the corner you have for the left side? so far i know for sure i need that one. I will take the rest off this weekend and see how the right side looks. Would you sell these pieces?

Hello, No not the top of the quarter panel. this piece is over the canvas of the convertible top. Where it is still good it is held in place with Phillip's head screws. I have already replaced the entire area of the quarter panel that is over the tire. I have a donor car for Sheetmetal but...

Hello, I am prepping my 67 Newport for paint. When I removed the trim around the convertible top I discovered that the strip behind the trim that i believe is what holds the top to the body is mostly disintegrated. Are these pieces available anywhere? I will admit that although I did do a bit...

One of mine was stuck like this on my 67 Newport. I used a wide thin bar between the door and and the body and pried carefully so as not to bend anything and the door opened. Problem was as described above. The lube had deteriorated to the point that the latch could not turn without some...

Here are some pics of fender and bumper. I have a few more. Rusty spots on fender are not dents just paint failure. there seems to be one small dent right at top of fender well about the size of a nickel. Bumper has no damage but chrome is not perfect on top which is very typical. Please...

OK, Will do. Might take a couple of days. We are supposed to have crappy weather here and its hard for me to get to where the car is during daylight during the week. Steve

New Yorker, I have bumper and left front fender in RI. Fender is white, needs paint no rot. Not sure on bumper condition, might have small dent. I would be at no more than $200 for both. If interested let me know and I will get you pics

Hello again, The car has a 440 with a holley carb on it, but not sure if its original carb. I would part with that as well. SA

Hello, I have a fender and bumper for you, but its in RI. If that's not too far away, let me know and Ill get you pics. SA

I put them on my first 67 that I owned back in the 80's. I just made a template from the donor car and cut them into my fenders. The wires were hanging behind the fender

Scott, My parts car is now indoors and accessible at any time if you are still interested in he hood Steve

Scott, if you're interested in a road trip to RI, I am sure we can make a deal. I think it would be better part of a day round trip. If not its ok with me, car is outdoors at the moment so hood is protecting the 440 under it. Steve

I have a dark green 68 New Yorker for parts if I can be of some help, just let me know Steve