Search results for query: *

  1. Ross Wooldridge

    Factory 4-Speed-C-Body-Photo-Thread

    Here is a true AC with manual trans C body - one of only a handful at best, I'm sure. I'll see if I can find any pics of the other one I know about
  2. Ross Wooldridge

    Factory 4-Speed-C-Body-Photo-Thread

    There are a documented few manual trans with AC C bodies - extremely rare.
  3. Ross Wooldridge

    How hard can it be...68 sport fury

    @68SportFuryAz - any thoughts on selling one of those tachs?
  4. Ross Wooldridge

    For Sale Performance Vacuum Indicator and Console Plate

    Would you consider selling just the performance gauge?
  5. Ross Wooldridge

    Bucket Seat Trim 66 Sport Fury

    The anodizing material doesn't polish well, by the way. If you're looking to renew them, best way is to strip them (using Lye based oven cleaner, or have them professionally stripped), polish them and have them re-anodized. The better of the polishing job, the better the anodizing result. The...
  6. Ross Wooldridge

    Bucket Seat Trim 66 Sport Fury

    Anodized aluminum.
  7. Ross Wooldridge

    How to Install Fan Shroud Bracket Cage Nuts

    @GOLDMYN The brackets are hard to find as originals - they are C Body specific if I recall. However, their design isn't rocket science, so you can easily make a set up that will work with some sturdy sheet metal, a sawzall, a vice and a BFH then a driller for the holes. I made a set years...
  8. Ross Wooldridge

    1966 Chrysler power steering box issue

    Quotes. Who rebuilt the box?
  9. Ross Wooldridge

    1966 Chrysler power steering box issue

    Following, as I'm going to have my boxes rebuilt. Who performed your rebuilds? They should fix that, I would think.
  10. Ross Wooldridge

    WANTED NOS Clip Part# 6006301

    Try Restoration Specialties and Supply in Windber PA
  11. Ross Wooldridge

    Driveline noise/drone/vibration

    Keep us posted. Another element of the noise I just thought of is a loose/soft/cracked transmission mount rubber, or even the crossmember bolts, allowing a slight flex which might change pinion angle? Just a thought.
  12. Ross Wooldridge

    How hard can it be...68 sport fury

    @68SportFuryAz - are you interested in selling one of the tachs? I don't care if it works or not, as long as it's got a decent housing and dial face.
  13. Ross Wooldridge

    For Sale 1965/68 Chrysler tilt and telescopic wheel and column 350.00

    I don't think so - the padded centre caps are all the same 66 - 68. Having dealt with many of these columns for my Chrysler T&C and my 66 Monacos, I'm very sure that this is a 66 T&T column, as it has the correct dash collar. It would fit perfectly in a 65 or a 66, even though 65s were tilt...
  14. Ross Wooldridge

    Driveline noise/drone/vibration

    Pinion and tailshaft angle mismatch will usually set up a vibration that comes and goes - a rhythmic thrumming. A steady gear noise does not indicate that to me AFAIK - but what I understand happens with the mismatch above is that it wears on the tailshaft bearing and the pinion bearing, so...
  15. Ross Wooldridge

    New Member, New Polara

    Quartz Conversions from Instrument Services (look them up) and they're available on eBay Easy-peasy, do it and forget about it. 1966 Fury clock quartz conversion kit
  16. Ross Wooldridge

    1966 Newport power steering pump snub stopper replacement

    It fits both TRW & Federal pumps, I believe. Federals have a number cast into them behind the pulley on the pump body, TRWs have the letters TRW cast in the same place.
  17. Ross Wooldridge

    Power Vent Motor- Anyone ever take one apart??

    The motor case's mounting points should provide the ground to the body to complete the circuit, but I have seen some window motors that require a ground wire. Make sure the motor is grounded properly in addition to what Big_John is suggesting.
  18. Ross Wooldridge

    New Member, New Polara

    Ahhh... and the no brake application issue you described came AFTER you'd put new flex hoses on?
Back
Top