Search results

This is an OEM Mopar 11 3/4" Flex Plate. It came out of a 1969 Dodge Coronet R/T with a 440hp engine. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

This is an OEM Mopar 10 3/4" Flex Plate. It came out of a 1969 Dodge Super Bee with a 383hp engine, but It will work with the 440, and the 340 when you use the 10 3/4" torque converter. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar Heater Hose Bracket for a 1967 & 1968 Big Block with A/C. It is in good condition. $15.00. Local Pickup, or buyer pays shipping.

This is a Mopar OEM Big Block Rear Main Seal Retainer with bolts, for the 383, 400, 413, 426w, 440, and 426 Hemi engines. Part #2128895. It is in very good condition, with no cracks or stripped threads. $25.00. Local pickup, or buyer pays shipping.

This is a Chrysler 1975 to 2003 A999 TorqueFlite Automatic Transmission with Torque Converter. It came out of 1988 Plymouth Gran Fury Police Car that had a HP 318 4bbl engine in it. It worked fine when removed from the car, and has been sitting under the workbench in my garage for years...

This is a Choke Linkage for a 1973 to 1978 340/360/400/440 with a Carter Thermoquad 4 Barrel Carburator. It could use a cleanup, but worked well when removed. $15.00. Local pickup, or buyer pays shipping.

This is a pair of OEM Mopar Early 60's 4 bolt Big Block Valve Covers. They were removed from a 62/63 413ci engine, cleaned, and painted, many years ago, and have been hanging on my garage wall ever since. They are in very nice condition with no dents or rust holes. $175.00. Local pickup, or...

This is a OEM 1970's Holley 2 bbl carburetor. It came off of a 1972 Dodge Charger with a 400ci engine, but was used on many 360 and 400ci engines in the 70's. It has been sitting on the shelf in the garage for many years, so I'm sure it will need a rebuild, but all the parts move freely. $25.00...

No, the tag is missing.

This is a OEM 1970/71 Mopar 383ci/335hp point distributor. It has been sitting on a shelf in my garage for many years, so it needs a good cleanup, and is missing the wire to the coil, but there is no side play in the shaft. $75.00. Local pickup, or buyer pays shipping.

This is a OEM Mopar 1969-71 E B & C Body Hood Pop Up Spring Part #2935375 for all of the following models; PLYMOUTH; Barracuda; Cuda; 1970; 1971; all. Satellite, Belvedere; Road Runner; GTX; 1971; all. Fury I; Fury II; Fury III; Sport Fury; VIP; 1970; 1971; all. DODGE; Challenger; Challenger...

This is a OEM Mopar 1965/66 Big Block 4V throttle return spring bracket. It came off of a 1965 Plymouth 383hp police car. It is correct for the 65/66 big block with a 4 barrel carb, but will work on any BB engine. $20.00. Local pickup, or buyer pays shipping.

This is a Mopar throttle cable bracket adapter for use with a high rise intake manifold. It raises the cable up about 1 3/4". I used it many years ago with a Tarantula intake, and it put the cable at the correct height, and angle. In the photos it is on a modified stock bracket, but it can be...

This is a Mopar throttle return spring bracket for a 1970's small block 318, 340, 360, with a four barrel carburetor. $20.00. Local pickup or buyer pays shipping.

This is a Big Block Mopar 1.72" fan spacer. Part #1674746. It is in good condition. $20.00. Local pickup, or buyer pays shipping.

OEM Mopar big & small block Starter Dust Shield. $15.00. Local pickup, or buyer pays shipping.

This is a pair of Mopar OEM 361, 383, 400 valley tray hold down straps. $15.00. Local pickup, or buyer pays shipping.

This is a Mopar 1970's harmonic balancer for the 400ci engine with a cast crank. Part #3614374. It is in good condition, and includes the pulley bolts. $25.00. Local pickup, or buyer pays shipping.

These are two pairs of OEM Mopar Big Block valley tray hold down straps. One pair is for the low block 361/383/400, and the other pair is for the raised block 413/426w/440. $30.00 for all four. Local pickup, or buyer pays shipping.

This is a water pump pulley for a big block Mopar. It came off of a 440 with A/C. It is in good condition, just needs a cleanup. The dimensions are in the photos. $25.00. Local pickup, or buyer pays shipping.