Search results

  1. MrMoparCHP

    WANTED Forward roller - very rear window - Fury 2D HT 1965

    Here are the pages from the parts book, these are the same numbers used on my 67 Barracuda, they have round guide. I can't say for a fact that a 65 Fury is the same but I have never seen square guides on any of the cars I have worked on (67-74) Alan
  2. MrMoparCHP

    WANTED Forward roller - very rear window - Fury 2D HT 1965

    Pretty sure the "roller" should be round. QUARTER GLASS GUIDE & ROLLER 67-70 CHARGER GTX ROAD RUNNER 67-69 DART BARRMOPAR | eBay QUARTER GLASS GUIDE w/ ROLLER 67-70 CHARGER GTX ROAD RUNNER 67-69 DART BARRMOPAR | eBay Alan
  3. MrMoparCHP

    Proper 69 Chrysler 440 fuel pump

    The 69 parts book has the double nipple one on c-bodies and the fitting one on b-bodies The 70 parts book has the fitting one on all. Alan
  4. MrMoparCHP

    For Sale NOS 2932873 HEADLIGHT DIMMER SWITCH

    I'll take it. PM Sent Alan
  5. MrMoparCHP

    WANTED Forward roller - very rear window - Fury 2D HT 1965

    I think these are it. QUARTER GLASS TRACK ROLLER w/ BRACKET 67-69 BARRACUDA DART GTS 340 SWINGER MOPAR | eBay QUARTER GLASS TRACK ROLLER w/ BRACKET 67 68 69 CUDA DART GTS 383 SWINGER MOPAR | eBay Alan
  6. MrMoparCHP

    Proper 69 Chrysler 440 fuel pump

    From NAPA https://www.napaonline.com/en/p/NNPB0092P Alan
  7. MrMoparCHP

    Proper 69 Chrysler 440 fuel pump

    Points the wrong way. Alan
  8. MrMoparCHP

    Proper 69 Chrysler 440 fuel pump

    The one on your car is the correct style (at least for 69) Alan
  9. MrMoparCHP

    HP exhaust manifolds/spark plug heat shields.

    Before, new wires were put on the car in November 2020 when I got the car, taken off September 2021 when I pulled the engine for detailling. Alan
  10. MrMoparCHP

    HP exhaust manifolds/spark plug heat shields.

    First Picture: I wasn't so lucky Second Picture: Here is a picture with one in place, can get a better picture later. Alan
  11. MrMoparCHP

    HP exhaust manifolds/spark plug heat shields.

    There are some different styles used over the years, the 69 with the HP manifolds use the ones like these (picture found on the web) Alan
  12. MrMoparCHP

    69 Chrysler 300 Dome Light

    I might have a better picture, will look later. Without the switch. Alan
  13. MrMoparCHP

    69 Chrysler 300 Dome Light

    If you do not see a switch then you have the version without (I'm pretty sure, the switch is part of the housing and not the cover) Alan
  14. MrMoparCHP

    69 Chrysler 300 Dome Light

    There are two versions, with the switch and without. This is the one with the switch. (picture found on the web) The one without the switch looks the same but where the switch is is just the tin cover without the switch. There is a third version that is all lens and no tin plate (I think this...
  15. MrMoparCHP

    69 Chrysler engine pull questions.

    Even with the core support out it was tough, I have done it with the core support in but with no grill or bumper. Alan
  16. MrMoparCHP

    69 Chrysler engine pull questions.

    The single engine mount bolt is all you need to remove to get the engine out. Once the driveshaft slips out of the transmission you will have fluid pouring out the tail shaft. Alan
  17. MrMoparCHP

    69 Chrysler engine pull questions.

    You will probably need every inch you can get, the radiator and ac compressor will probably need to come out. Alan
  18. MrMoparCHP

    69 Chrysler engine pull questions.

    The problem I see is moving the engine forward. You might need to remove the bumper and grill. Another option is to separate the engine and transmission. Alan
  19. MrMoparCHP

    69 Chrysler, How to pull A/C compressor?

    If you are looking to remove the compressor from the engine there is no reason to remove the hub/pully assembly. Just remove the two bolts into the water pump housing and the one into the head, then remove the compressor with the brackets still attached to the compressor. Alan
Top