Search results for query: *

  1. N

    999 Paint Code 1960 300

    As the decoded sheet shows, the 999 code is special order color, but doesn't tell you what the special color was. It could be any available color. d
  2. N

    Too hot- Part 2: Wrong heater hose routing

    There is/was a Ranco valve repair kit available at NAPA about 5 or 6 years ago when I bought one. Really cheap, but you must remove the valve from the car (removing glovebox first helps) and then carefully pry tabs up to dismantle the valve to replace the rubber parts inside.
  3. N

    1964 Dodoge 880-Inadequate Brakes

    10 clicks sounds excessive. I would back off only until no drag is felt, then maybe tighten by a click or two. Very slight drag is ok, as long as it is even on both sides. Since you are from the PNW, I'd also suggest contacting AAJ Brakes. They do lots of bolt on disc brake conversions...
  4. N

    1962 Chrysler 300 new to me

    Congrats! My wife drove a 62 300 4 door hardtop for a decade or so when we were first married. 122" wheelbase instead of the NYer 126" means it's easier to find parts for the front of that car than if it was a NYer. Nice riding/handling cars. After the 300, she had a NYer wagon with power...
  5. N

    7,800 Original Mile Creampuff

    Actually, there is usually a 'Survivors Tent' on the show field, not far from the Grandstand. This car should definitely be in that tent.
  6. N

    Fel-Pro cork Valve cover gaskets SUCK!

    I have yet to find any combination of primer/color high heat products that maintain their orange color on my valve covers or the painted intake crossover area on my TNT equipped 70 Hurst. Maybe powder coating would work if there was such a thing as the right color. I try to find nicely...
  7. N

    found a big mopar obsolete parts vendor in ga

    Oh my goodness you guys are making me feel old (actually, I'm about to turn 70). Has Frank actually been gone since 2014? I still remember his space(s) at Carlisle. I don't think I ever bought anything from him, but always went to drool over his inventory. Prices were just prohibitively high...
  8. N

    WANTED Fuselage Body Imperial 69-73

    Wishing you luck. I tried for years/decades to find a 70 two door triple black coupe equipped with a 440. I'm beginning to think they didn't make any.
  9. N

    60 413 engine 8 bolt flange no flex plate crank swap for 6 bolt flange 62 up crank

    Back in Back in the day, the usual failure mode was caused by people starting the car in the driveway or garage by tapping the gas pedal, setting the automatic choke and fast idle, and then pushing the reverse button before blipping the throttle to bring the idle down first. This resulted in...
  10. N

    NOT MINE 300 Hurst.

    you are correct. The door sticker date is 6/70. Build sheet and fender tag are somewhat difficult to photograph, but appear to say the following: CM23 M6T5 A01 A12 B41 B51 C16 C55 C92 D34 D53 E86 F11 F25 G11 H51 J21 J55 N41 P28 P31 P45 R23 S13 S31 S61 S77 V78 W23 X55 Y39 U75 MSRP...
  11. N

    NOT MINE 300 Hurst.

    I sent the wrong Hurst T-shirt picture!
  12. N

    NOT MINE 300 Hurst.

    The S.O. for the car is 125-CC-J99788 (on window sticker). Vehicle order number on the Broadcast sheet says 125J99788. After Mr. Rhodes passed, the car was sold to fellow Colorado resident Howard Long of Golden, CO. in 1989. I purchased the car from Howard in 2000. I have pretty much every...
  13. N

    NOT MINE 300 Hurst.

    I was unaware of your registry. I have CM23UOC226728, which has console, tilt-telescopic column with rim blow, and AM/FM search tune radio. Originally sold out of Griffith Motors in Denver Colorado to Richard and Betty Rhodes on 12/3/1970. They traded a 67 Plymouth 2dr hardtop.
  14. N

    NOT MINE 1960 Dodge dart SXT Sport Rallye Sedan 2 DR Sedan $5,800 Phoenix AZ

    Hopefully this car at this price can help a younger enthusiast get into the hobby for reasonable money. If I was just starting out today, I might never get involved at what some of the 'entry level' asking prices are.
  15. N

    361 5.9l rebuild for 62 Chrysler Newport

    I agree with comments on dual exhaust and 4bbl carb, but would not wasted time or money on heads as you're still stuck with the log type exhaust manifolds holding back on breathing. It's not a crossram 300J from 63 with appropriate cast iron headers, so just have fun with the least intrusive...
  16. N

    Were to get rubber parts.

    There's a place called Van's automotive in WI that has some stuff, and JC Auto Restoration in WA. Also dpmotorparts.com, Andy Bernbaum, some other vendors in Hemmings. Pat Walsh I think is listed in Hemmings, based in MA. d
  17. N

    1962 300 Sport Coupe - Disk Brake Q

    On a 62 Sport, there are two options I like. One is AAJ Brakes, the other is to take the more modern self adjusting/single wheel cylinder set up off a 63 Chrysler. Still drum brakes, but easier to service and setup than the dual cylinder system.
  18. N

    Hurst 300 Stripe Kits - Performance Car Graphics

    I have an NOS Hurst stripe kit (no instructions) that has everything but the wheel stripes. Will you be making the wheel stripes available separately? Thanks,
  19. N

    NOT MINE 1970 Fury Convertible.

    Looking at the rot at the bottom of the rear quarters where they meet the rockers below the doors, I think I'd want to put the top down, open both doors, and then see if either of them would shut again. A unibody convertible with rust in that area might not be a trivial or inexpensive repair.
  20. N

    NOT MINE 1955 Chrysler new yorker 2 door HT $7,500 Listed a day ago in Pioneertown, CA

    Indeed. When I restored my previous 55 C300, it was because it was the first year for the 'Letter Car' 300, and it was a year of birth car for me as well, and it was back in 1992. Even then, the first 300 was already a 37 year old car that was a bit past its prime (which made it cheap to...
Back
Top