Search results for query: *

So, they are usually just the sheet metal door?

I think the DMT heater box rebuild kit includes foam seals for the defroster door. I think because the shop that did work on my car did a halfa$$ job on the heater box. When you hand actuate the door from closed (first pic) to open (secon pic) there is about a quarter inch of travel and it does...

New question, thanks for the previous replies. The door/ diverted for the windshield defroster. Should this open all the way? From closed to open there is only about a 1/4" movement. There is foam on the inside and a layer on the outside, I didn't apply this, is this factory or part of the...

Pic didn't upload

1) I would like to bench test the actuators on my 69 Plymouth Fury with AC. Can this be done without breaking the bank buying a vacum pump and the minimal gauge set up. The test procedure requires 8 inches of vacum. Rebuilding my box during to the shops lack of testing and cleaning the...

Thank you, the Rockford offer is closer the Chicago

Interested,

Under dash side, what's your location

Heater box

Today, was the day to check the heater box heater and condenser. Unfortunately the shop did not clean either. Off to the radiator shop for cleaning and pressure testing. In addition either ma mopar, a servicing in the past or more likely the shop that had the car finished or destroyed the heater...

Started the punch list, on the dry erase. Trying to get organized. Also converted one of my 1970's? Fluorescent lights to LED, to bring the lighting current load down. One more to go, and hang another above the 69's engine bay to start reinstalling the small bits and the hardware hunt begins anew.

Fox river Trolley museum might be place to hold the C body show

There's a yard in Stark Fl, be a day before I can get to the address.

Today culminated in installing the glass in the tailgate. First time all the glass is in place(except windshield). Cleaned up the tailgate wire harness, re-rapped the conductors, cleaned the pinch welding at the bottom within an inch of its life. Cleaned the felt window tracks, of debris and 50+...

Yes the smell of chilled victory, then I got more annoyed at the lazy shop for not removing a couple of latches on the tailgate and the latches link arm i just installed. Maybe today I'll remove it and clean it off. Stupid OCD.

How many ways can you flip a door latch connecting rod, apparently 2 hours worth. Rear tailgate has three latches, two that open on the passengers side and one on the drivers. The latch has four connections, one at 2-o'clock another at about 4, 7 and around nine. The two at two and four are easy...

Purchased, a donor car and station wagon rear plastic interior pieces from them. My past transactions were very good.

Two barrels, these plus matchbox cars, keep'em busy.

Rock'en great work

69 wagon, friend named it the wunder wagon; because it was a wonder it was still running in the late 70's.