Separate names with a comma.
I have worked with
Industrial Radiator Services Inc
1625 E Donovan Rd # A, Santa Maria, CA 93454
They are popular so busy, I had them inspect...
The cooling specs are in the Factory Service Manual, diameter, number of blades, type of clutch, shroud etc.
Pop that vacuum switch off, should help.
I don't recall it being an issue (to install), wheel liner was out, braces were in (did not remove).
I'm pretty sure I inserted it through the...
I looked up an original number on eBay and it showed a flex, Mopar tag and all, that is why I asked.
What engine do you have?
Were the originals flex hoses?
if it ain't steamin it ain't overheating.
Impeller on the pump, 8 or 6 blades.
The radiator and or the block could be full of deposits limiting the capacity and or flow.
More horsepower (pneumatics)
70-74 Mopar Radiator Cap OE Style All Models A/B/C/E Body 16 Lb Zinc SM CO #647 | eBay
16 Lb Radiator Cap 1962 66 A Body A/C 1970 Later W/O...
I'm pretty sure this is the cap you need.
Can you close the hood? I mounted a Champion like that (drilling new upper holes) and ended up having to lower it to the upper holes they had and...
These are for some other Mopar but all Mopars have the same basic shape, if all you need is one inch you should be able to get it in...
The factory lines had a loop that could be extended to make up 1"
If I had to say I would say it can be done without taking the dash out.
There are multiple nuts on the engine side (don't worry...
I would exercise caution when looking between -68 and 69+, many things on these car changed in 69
They do have C-Body stuff, what year is your car?
My car was the prototype for both of these and they are perfect.
Jim went above and beyond the call of duty on these.
I don't advertise on my...
Keep in mind the thermostat does NOT impact the operating temperature just the point that it opens, if your engine is running at 200 it will run...