Separate names with a comma.
I'm looking for these in better than average condition, pitting seams to be an issue with these. [ATTACH] Thanks Alan
I need the chrome trim for the front left fender extension and the right rear quarter extension. These need to be in better than average...
I'm looking for a Super-Lite switch or at least the knob. [ATTACH] Thanks, Alan
[ATTACH] I need a keyless latch, this one doesn’t work. Not interested in keyed. Alan
Looking for a voltage regulator cover with the mounting flanges that have the bolt holes. Not looking for the one that snaps on. It doesn't need...
I'm looking for two of these with clamps (and bolts)... [ATTACH] Alan
I'm sure this will be the first of many parts request. WANTED 1969 Dodge Polara dash ash tray, better than average. Thanks, Alan
A friend of mine needs the clip above the seal where the cable goes through the floor on a 68 Polara. The 69 uses the high beam switch so I now it...
As the title says, wanted: Mopar Action magazine August 2015 Thanks, Alan
I need a pair of factory small block valve covers for my 67 273, these have the breather pipe on one side and the PCV on the other, no separate...
I need a right hood hinge for a 69, I'm pretty sure 69-73 are all the same. Thanks, Alan
I'm looking for a factory 69 driver door window in clear not tinted. It needs to be a 69 and clear. Thanks, Alan
I need a full set of better than average sill plates. There are two styles, one that was used on the early 69's and the other that was used on the...
I need the wire that runs across the engine to the AC compressor. On the 69 it is a single wire with a 1/4" on one end and a bullet on the other....
I need another one, I know a substitute will work but I would like to have an original. If there are differences it is on a 69. [IMG] Thanks,...
I need the cowl vent cover for my 69 Polara, probably the same through 73 This is the plastic one not the wire mesh one used on the early cars. Alan
I need a very nice switch panel for a 1969 Polara/Monaco NO Superlite WITH Rear Defroster (R WINDOW) Thanks, Alan
I need both the shift lever and turn signal lever for my 1969 Polara. These are the satin finish ones and not the chrome. The parts need to be in...
I need the pair of bushings that go in the ball socket coupling. These go in the coupling that is the bottom of the post that is attached to the...
I need some door panels for my other Polara as i took the ones that were in it for my CHP project. I don't care what color style year etc. They...
