Separate names with a comma.
The factory DID match the driver-side placement. There is NO good placement for the original right side mirrors. These mirrors were never good as...
Behind the finish panel. That is how my 67 Barracuda was. Alan
Keep in mind the factory didn't paint the roof on vinyl top cars. Alan
When I removed pieces from my floor pan I cut alongside the frame rail flanges then peeled the remaining strip off. As you roll it off it will...
Irreverent in what he is trying to do. Alan
I had a 4-door hardtop car that provided parts for my 4-door sedan project. I gutted the doors on the parts car and saved anything that looked the...
I used a 69 4-door hardtop for parts on my project, the doors were essentially the same. The b-pillar in the hardtop matched the lower section of...
I'm pretty sure 69 and newer had matte black and 68 and older were body color. Alan
Once you get started and learn to weld, work metal, you may just take on those other areas, baby steps. Alan
The tag on the dash must match the body stamp numbers and the title (cutting out those pieces is illegal) If you get a new shell, you need to use...
In the US this is illegal. Alan
My 69 had bolt on clips, my car has 2" square access holes to get to the nuts. Alan
The numbers I posted are for 16", if you need a different size replace the digits 16 with the size you need. Alan
Find original frames, get refills as I posted earlier. I have no idea when it became normal to replace the frames, never thought about it till...
I think these are Anco U16R 19-16 and these are Trico 43-160 44-160 I'm sure a lot of store have them IF you know the number or are willing to...
My body guy said he could make them from scratch by mapping out the grooves and pounding them in using the expansion joint in the garage floor and...
Maybe it is that the Federal typically has simple brackets, I have never seen the wagon wheel pulley on a Federal. Also the Federal mounts a...
This is an ugly setup, maybe I'm just partial to the TRW/Federal Alan
In 69 all c-body used the same inner fenders and seals In 70 some used the earlier inner fender and some had a different one (probably related to...
I still think you have the correct ones for your car, you just need a picture of them installed. Alan
