Separate names with a comma.
If you are looking for the connectors at the alternator...
Mopar 67 68 69 Regulator Repair Harness NEW | eBay
At the voltage regulator...
Does it read 25 at a stop?
You may have a grounding issue and it will not be at the map light.
Even the kit has a 5-pin harness (with 5 wires), the OP didn't say weather the harness was purchased separately, part of a kit or salvaged.
You can replace the Ballast with the new one.
One of the biggest confusions with this kit is what to do with the ballast, most people seam to...
Everybody make this so complicated.
0. Disconnect the battery
1. LEAVE ballast and existing wiring alone!
2. Throw the ballast in the kit away!
The correct bulbs for your car are listed in the Owners Manual, over the years bulbs are discontinued or people replace them with something...
The only one way is referring to the terminals, I believe one of them is D shaped and will only go on the correct post.
An original harness should...
Also check with M & H Electric Fabricators
Reproduction Wiring Harnesses for America's Muscle Cars
Do an internet search for S24MY, looks like they are out there.
(I'd avoid Jeggs, they will back order it and not tell you)
Last two digits of the part number on this battery are 62
TurboStart S24MY AGM Sealed 1966-74 Mopar Battery-Yellow Cap, 690 CCA
Knowing the 62...
You want SR105, it is the correct one, is it also used for power windows?
SR102 will work but is the wrong form factor (different mounting tabs)...
Forget to connect the vacuum line?
Check all the bulbs, front,rear, dash. If anyone of them are bad they will not blink.
If they all work then you may need to replace them all. I...
Yes if your turn signal switch is broken you will not have brake lights, the wire from the brake switch goes up the column to get to the taillight...
I know in 69 there are two terminals (male 1/4" slip) on the fuse block, one pre-ignition, one post.
If you use these you will need to add an...
One of two things fail
A. The peg on the switch (red part in this picture) breaks off
B. The peg on the column breaks off
make that three
In 66 column shift at the base of the column, console shift in the console.
I don't think you can get a 60" ready made battery cable, that is what lead me to M&H