Separate names with a comma.
No idea on the Formals but my 69 Polara with a 318 had a 727. Alan
The best I could tell my 69 DK41 did not have the extra spot welds or torque boxes or anything special, heck I wouldn't doubt they had less. For...
Agree, my car a documented CHP 69 Polara (DK41) came from the same Belvedere, IL plant that other cars came from. Alan
The fact that they purchased a standard car from the local dealer doesn't change the history of the car. It was purchased to be a police car it...
When I was about 10 years old my grandfather went to the hardware store with the Barracuda (this car) to get some 8' corrugated fibreglass sheets,...
Well within the limits but it sure got looks at Home Depot when I was loading it. [ATTACH] Alan
A friend of mine took the passenger seat out of his 69 Barracuda and put a 340 long block in. Alan
It was the large washer with the finger that locks it on, the finger broke off. Once home and not raining I ended up taking one of the clips from...
I lost a clip on my 73 barracuda once, ended up taking the laces off my boots and running them out both door windows to the wiper arms, tied them...
Not a NYB but [MEDIA] Alan
Until I joined this forum I had never seen those, I grew up on Mopar but everything C-Body seams new to me. Alan
Bunch of Factory Manuals on eBay, nothing beats the FSM. Alan
When I did my Barracuda I went to NAPA and they asked me what brand, I said I don't care long as they are black. Alan
I got mine from Lectric Limited and were correct for the 69 440 in a C-Body Lectric Limited | GM Mopar Ford Corvette Wiring Harnesses / Spark...
Also I think people fail to seal the bracket to the block, yes there are a couple seals in there but stick some Ultra Black on all the edges of...
I wrapped the area that contacts the glass with tape to protect the glass. Alan
They are probably looking at leaks as the issue. Alan
When I first started on my Barracuda I knew nothing about removing glass, heck I didn't know much about anything at the time. The Barracuda has a...
I disagree, I see a cross brace and a gap in he reflection that is where the upright is. What I don't see is something to help with the front to...
It looks like it has a support under it to cross braces on the floor but that is it (at least that can be seen)
