Separate names with a comma.
Sorry I misread and thought that it was a pair which would have been a real bargain! I think that I will pass as the shipping for only one vs pair...
I'll take those if still available. Can you check the shipping price to Finland? USPS is still probably the cheapest one.
Hmm is it actually a flanged, so that you could just drill it open and use bolt and nut? That's what i would do in a heartbeat if I didn't have a...
5.9 magnum responds very well to custom tune. I understood that you can get lots of more torque with updated tune. Not sure which companies still...
I really wouldn't be that worried about one bolt missing. Whole torque of the engine is transmitted to transmission via four smaller bolts in...
These https://www.ebay.com/itm/352244829804 And couple cheap turbos from same place and you would have plenty of torque:lol:
The controller or the hand held should not freeze, in my opinion that is not normal in anyway. I would suspect that there is some thermal problems...
I am looking for a single plane M1 intake for 383 for multiport efi conversion. Shipping would be to Finland. Thanks!
Hello, I have some problems finding a mixing formula for -72 Plymouth fury gold leaf color. I have found by googling chrysler code DT63559, PPG...
I had same in my 93 daily driven Audi. I just sprayed some rattle can clear basically without any masking on the problem areas once or twice per...
Did you have the front end off the ground when the steering felt like locked at 3000rpm and above? As I have similar problems I think that I will...
My guess is that the two stage flow control valve is causing the problems I have and that is the main reason I have the Saginav unit waiting....
Just my opinion, forget the flanging, making a decent butt weld really isn't that hard and then you won't have any sandwiched metal waiting for...
I have had the same problem with federal pump on my challenger for the past 10 years. The sudden change in steering effort really wakes you up...
I found a 71 sedan fury parts car and got the rear glass from that one. Thanks for the info though. It will be useful when I break that one during...
I got couple of possible leads for used glass in Finland. Could someone chime in and verify if 69-73 c-body 4dr sedan Dodges and Chryslers have...
Had one of those moments yesterday when I seriously think about changing my hobby to collecting stamps or something: [ATTACH] Probably made some...
Just to clarify, I am not here to undermine Kyle340's sale in anyway if someone sees it that way. Those gears seem to be somewhat rare these days...
I made a 3d cad model from that gear and printed it from carbon fiber reinforced plastic. I really haven't tested it yet but if anyone needs the...
I've had mity mounts on my hopped up 383 in Challenger for ten years and 8000 miles. No problems yet, seems to be very nice product
