Separate names with a comma.
PM sent
Does anyone have a failed, leaky example of the original heater valve they are willing to donate for an experiment? I would love to take that body...
or this one [ATTACH] [ATTACH]
I know this is old, but what about this valve...'85 New Yorker https://www.rockauto.com/en/moreinfo.php?pk=815488&jsn=542&jsn=542 [ATTACH]
WOW...30 to nuthin'. The masses have spoken. I guess it stays intact
That is a good point...back when I rode Harley's getting stuck in traffic was the worst, especially on an iron head Sportster.
Hello to all, I am looking for opinions and actual real world experience in regard to my question.My 1970 Fury is equipped with manual air con...
There is an even better choice ....More Information for GATES 32348[ATTACH] These are for silicone hose, but work great and don't cut the...
Stainless? The fittings threaded into the case are zinc coated steel.Brass AN ftgs are too soft.The ty-wraps are to hold split rubber tubing that...
mount is fabbed out of 3/8" pencil iron and 14 x 1 1/2 flat bar.....more pics to follow [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I am sorry for the long delay on finishing up this thread, but it has been long (not so fun) summer. I have finished up the trans cooler install...
The straight and taper thread are the same.....it is made to screw right in by hand. A soft material like aluminum is not great for tapered NPT...
You guys are missing the point of these fittings. They are straight thread with a copper sealing washer to take the stress off the 727 case. They...
Well, I lucked out and found a fan from my friend Chuck down in Lewiston for $20.Gives me a chance to check out a secret salvage yard that...
I just ran into a problem....the fan clutch I ordered is too tall. There is not enough space between the pulley and the radiator for it to fit....
Don't worry, it will be done to my high standards. I may bend up 3/8" steel lines myself. The cooler is furnished with -6 AN fittings(JIC) instead...
Thanks Kevin, those kits are on backorder at Mancini and I think I will be able to find a used cheap stock one somewhere. I think 22" fan shrouds...
I will be getting my repaired and cleaned radiator back this afternoon. I have been gathering parts to put the cooling system back together. I am...
I modified an existing drawing I found on the internet...the top outlet dimension is backwards:oops:. I will correct it.I can't figure out how to...
I thought I would post this measured drawing of the 22" standard cooling #2898058 that is in my '68 non A/C Newport. It may help someone figure...
