Separate names with a comma.
22" rad is on the left. 26" on the right.
the ovals had a nice mellow idle but raspier when getting on it. i used to like the sound a lot, but could never find a comparable muffler.
headliner prop is amusing.
some napa auto parts stores can custom mix spray cans. might be worth checking into.
i would try upholstery webbing. if woven between the springs and fastened tight at the edges, it should tighten things up . it's used for...
is that a 37 chev in the background? next project?
the inset of the headlight doors should be black. that helps the overall look. if you are looking for weight savings , don't use the SF grille. it...
looks sharp and worth the money.
seems like the trim may not go completely to the end of the bow. there must have been a little room left to compensate for not centering the trim...
Coker Whitewall Tires | Coker Classic Tires
Universal Vintage Tire
although highly unlikely, finding an old shop that has an arc grinder is the best method. they come up for sale now and then , maybe make a few...
just low beams or both low and high? you might have a bad dimmer switch. try stomping on it a few times. sometimes they come back to life.
if it is cool outside the material will tighten and stiffen. they all strain some and are tougher to close when cold.
the opaque plastic is for the upper dash panel flood light ,not the ignition, on a fury. not sure in your case.
local lawsuit : PiNZ part of lawsuit against Cuomo seeking OK to reopen
PINZ PART OF LAWSUIT AGAINST CUOMO SEEKING OK TO REOPEN
so, i'm not sure if you are asking about the ignition switch or dash panel. the fury panel has a flat piece of opaque plastic. i can't remember...
i have no personal experience with them but they have at-home plating kits.
on a fury there is a shroud that goes over the bulb. it has a small hole with tinted plastic inside. not sure if dodge is the same or not.