Separate names with a comma.
Available on ebay.
1961 PLYMOUTH 14” HUBCAP WHEEL COVER HUB CAP OEM FURY BELVEDERE '61 Set of 3 | eBay
1961 61 Plymouth Fury Hubcap Hub Cap OEM...
For Sale - 1968 Plymouth Fury III Convertible in Austin, TX -- $16k
This is what I used. Unconventional, but they seal great.
2.25" HEADER Honda DOWNPIPE EXHAUST Acura GRAPHITE DONUT GASKET D16 B18 B16 | eBay
Here are a few for MSD ignition.
mopar msd conversion wire diagram images - Bing images
Thank you for the explanation. I read that if the governor pressure to high it could result in downshift problems. What I don't understand is why...
Sorry it's a 68' Chrysler. I'll look into the part throttle down shift module mod.
I need this piece of stainless hinge cover trim, or entire cover, if available. Driver side lower cover. TIA.
As title states, transmission not down shifting when coming to a stop (always). I say always as sometimes, I feel it downshift. The last test run,...
Did you check there is a preload on the push rod when installing the MC? Should be around 1/8 inch.
I'd like to try this HEI modification. Can someone recommend a good quality U.S. made electronic distributor. TIA.
Could you please provide a picture of the fender tag. Thanks.
1955 Chrysler New Yorker
I'd imagine it may be bent directly in the middle near the fuel filler, as this would be the weakest point. If this is the case. you may get lucky...
Yes, it can be done. I did mine a while back.
I believe, in your image, that would be where the trip odometer cable goes. Speedo would be clip on.
Trip odometer fitting.
Yes, 3/16" Dia. copper/nickel, rust and corrosion proof, designed for areas prone to corrosion. Hope this helps. I choose this one because I'm not...
Posted above also.
Capri Tools 3/16 in. Double Flaring Tool | eBay
This tool has good reviews. FYI, Don't waste your money on the cheapy $23.00...
This is what I used for brake line. You will also need a double flare tool, and a tubing cutter. Takes a bit of practice. You should have enough...