Search results for query: *

I’ve repainted my car back into its factory colour after stripping the previous paint jobs off. I reinstalled all of the lights, etc and both front side marker lights (amber) in each fender aren’t staying on with the lights on. If I reach into the back of them and wiggle each one they will go...

The power antenna on my 70 300 has been replaced at some point in the past, and is currently not working. A friend gave me an era correct power antenna he had and I thought I would just swap it out with mine, then I thought I should bench test it first to ensure it is working before installing...

I’m refinishing my 1970 300 convertible, and I’m working on the passenger side fender and door. I’ve removed the fender pentastar and it is basically all black plastic now from years of abuse, so I can’t tell what the original colour was over the black plastic. I see that both gold and silver...

I’m looking at buying a 1957 Chrysler Windsor that is complete, but has been sitting for a long time. The car would need a restoration but is definitely saveable. This car has single headlights, and in searching photos of 57 windsors I see mostly dual headlights. We’re the single headlights...

I’m prepping my 1970 convertible for paint, and I’m playing with the fit of the drivers door. The door operates perfectly, and the body line towards the top of the door lines up perfectly with the same body line on the front fender and the rear quarter. My issue is that at the front bottom of...

Does anyone repop the rectangular plastic moulding clips that go along the rocker and hold on the stainless rocker trim along the bottom of the car?

What do you guys and gals recommend to set engine idle at on a 440 engine, and secondly how are you going about setting engine idle speed if you don’t have a tachometer?

I had some matching done on the 440 out of my 70 300 convertible. I’ve spent the week assembling it, painting it and reinstalling it, and today I was able to fire it up and do the cam and lifter break in. I idled the car at 2000 rpm for 20 minutes or so, and then I noticed that it was getting...

I need to slightly move the bottom of the drivers door inward on my 1970 300 convertible about an 8th of an inch as it is slightly out from the fender and rocker. Can I make this adjustment without having to pull the front fender?

I’m looking for a correct power antenna for my 1970 300 convertible. Any leads would be greatly appreciated!

I’m putting my 1970 300 convertible back into factory colour, and I’ve started with the engine bay, door jambs and the trunk. The jack instruction decal was removed from the underside of the trunk lid before it was repainted years ago. Can someone help me out with where the correct factory...

I spent the day stripping the overpaint off of the rear of my 1970 300 convertible as I was curious to see what was underneath and as expected I found some very iffy body repair work over the rear wheel openings; at one place there was 3/8” of bindi over the poor welding to rebuild the body line...

is the jack for a C body the same as other mopars of the same era, or are they unique? The jack and tire iron are missing from my 1970 300 convertible and I’m starting the process of finding a replacement. Also, is it the base of the jack that goes into the top of the spare with the threaded rod...

I’m looking for some saddle tan interior plastic parts for my 1970 300 convertible, things like kick panels, door opening rear edge trim, etc.

I’ve painted my engine bay back to factory green jade metallic, as well as the inside edge of the drivers door and the drivers door jamb. I’ve now started on the trunk and have scraped off the overpaint off of the latch shelf area. My trunk is black other than the latch shelf part where the rear...

Does anyone repop 1970 C body door seals? I’d like to replace the ones on my 70 300 convertible, as well as find some of the small rubber door bump stops.

I’m monkeying around under the hood of my 70 convertible and have wondered for a while about these tabs on the inside of the front fenders, up towards the windshield. What is the purpose of these tabs?

I was poking around in a box in the trunk of my 70 300 if “extra” parts that came with the car, and came across this. If my mind serves this is a cover or “roof” piece over the firewall wiring plug centre ? If so, how does it mount in place, and if not any guesses on what the part is?

I would like to find a new headlight door decal for my 70 300, but I haven’t been able to locate one. Does anyone know if they are being reproduced?

The “U” shaped rubber seals are missing from the bottom of the inner fenders on my 1970 300. These are the ones that seal things up around shock towers. Does anyone know of a source for these?