Search results for query: *

Folks do any of you know or have tried this? Will 4th gen 2014 Ram 1500 wheel fit a 1996 Ram 1500? Both seem to have the same 5.5” x 5 bolt pattern. Here’s a pic of the specific wheel I’m looking at. They are 17x7“, existing are 16x7” Thanks all for any assistance.

Any members here that fix or sell used Riding mowers? I’m looking for some Poulan or Husqvarna left headlight parts. Might also be same as some Craftsman models ? I ran into a window A/C unit :rolleyes: Left bucket or housing - 532183832 Left lens - PN 532189754 socket for the bulb - PN...

I’m looking for a rust free, clean Drivers door for 94-01 Dodge Ram Extended Cab. I don’t know if it matters but my truck doesn’t have power windows or locks. If you have one or can recommend a yard that has rust free sheet metal Please PM me. I‘m in southern Illinois. Thanks!

I’m looking for a Mopar Performance Intake Manifold P4529118, for RB 440 in nice original condition with no cracks or excessive porting, and with good threads. It is also sometimes listed as or marked P4532063, possibly on the bottom. I believe they called this the M1 dual plane intake...

99 Durango 5.2 starts and dies. If I give it gas it will run but won’t idle. If I don’t give it gas it dies instantly. Runs above 1100 RPM but below 1000 it dies. I suspect I fried something when charging it last. Wife was pressure washing so I closed the hood. Battery charger was under...

I’ve been researching/looking for a new battery charger and can’t seem to find one that does most types of batteries, 6 and 12 V, lead, gel, etc and has enough Amps to start a car with dead battery, and does battery maintenance/ trickle and doesn’t have negative reviews warning that it quits...

Why is it so hard to find replacement rubber washers for the shower connections? Easy enough to find water hose rubber washers, seals, gaskets, or whatever they are called, but same thing for a Delta shower head, hose, and main connector to the pipe coming out of the wall no dice. What are...

Thanks Bob and Eldon

Looking for the wise minds here to advise on some things I may not think of on my own. I have a steel bed 20 ft car hauling trailer with dovetail and that sucker is really heavy and drags easily. I’ve been thinking of buying a small, single axle, no brakes, trailer with a drop down...

I know not C body but some you have experience with B bodies and are very knowledgeable on Bs as well. Looking for some 70 Plymouth Air Grabber parts such as the following: Firewall grommet with three holes for the hoses Trico vacuum canister with 2 same size little inlets and bracket and...

1970 B Body 4 Speed Reverse Lockout, Interlock, Reverse lock. I know there are reproductions available. I’m looking for original parts. I’ve seen them called different things. My understanding is that on the big block cars the torque shaft or bell crank is shorter than the small blocks, the...

Wanted 66/69 factory style Hurst Shifter Rods Looking for a set of shifter rods, swivels, and levers or just the rods in decent shape. Also would be interested in a 69 style bayonet Hurst shifter with 6353, reverse lever. Not looking for repos or concours and yes I’m aware they’re out there...

Has anyone done it and what did you do? Specifically asking about the chrome ribs not the rest of the console. Paint, pistol plating stuff?, forget what they call it. I know there are repops. Not interested. Also know replating not a viable option. Thanks for any ideas.

62 Chrysler Newport Convertible In Florida. Not mine but came across Hankster’s Hot Rods. Wheels are not right but a good looking car. What do you guys think? I’m not a buyer, just sharing.

What is the correct pickup for the 933 and similar oil pans? Bent or straight? Your expertise is appreciated Cheers, Bryan

I’m looking for a Mopar Performance Intake Manifold P4529118, for RB 440 in nice original condition with no cracks or excessive porting, and with good threads. It is also sometimes listed as or marked P4532063, possibly on the bottom. I believe they called this the M1 dual plane intake...

These 2 Piece Metal Radiator Shrouds were reportedly used from 62 to 68. I’d like an original instead of aftermarket or custom. I’ve seen two types. The one I need looks like the picture below. 2 piece metal shroud part numbers: Upper PN # 2417 423 Lower PN # 2417 427 Contact me by PM by...

Guys I need to repair my car trailer. I bent the jack dropdown extension. The bent piece is 1 7/8 OD mild steel square tubing. ID appears to be about 1 3/4. So pretty thin. I’m having trouble sourcing locally and online. Anyone with suggestions or anyone have some scrap? The jack came off...

Hey guys. Anyone ever had to deal with a 96 dodge ram cup holder that broke & wouldn't pull back out to open? Also I'm in the market for a good used one. Thanks for any help!