Search results for query: *

Hi Guys and thanks for all your advice! I found my problem in that the Male contact on the bulkhead connector that the fusible link went to was cracked. I replaced it and headlights now work!! Can't tell you enough how relieved I was! Thanks again!!!

Thanks for your advice I really appreciate it. Looks like a tough one to fix this problem!

Thanks John. Assuming replacing the fusible link wire from starter relay to connector?

So all my lights were working except the headlights. I changed the bright light dimmer switch on the floor with no change. I bought a new headlight switch and before I put it back in, I wanted to try it. So I turned it on and put the cable back on the battery. As soon as I did that, there was a...

What was the engine? 440? Any pics?

could that be my problem?

the shoes are both the same size

Hi guys, I have a 66 Fury with drum brakes on the front. I have a single Master Cylinder. I had some squealing in my front brakes and I noticed the hubs and rims very extremely hot. I have replaced the wheel bearings, put on new drums and new shoes with all new brake hardware and my hub and rims...

Believe me, I did think of that, but when I called a local LandRover dealer, they said the couplers were obsolete. And I bought the last one I saw on E Bay. I never really looked into any other year that might have had the same coupling. Does anyone know?

I had the same problem, so I had the thickness ground to the same size as the old one, then counterbored the holes so the bolt head would fit. Dropped right in! Of course, I work in a machine shop, so it was no extra $$ for me.

Yes it is twisted and connects at 90 degrees. Mine was broken also so I just replaced that piece with a hard wire so the connection would be made.

I did try to fit the new one in and it was a struggle and didn't seem to want to go. Something would have to be adjusted one way or another for it to fit.

Thank you for all the info! I bought the last one(Range Rover) he had on E Bay and received it yesterday. This is for my 66 Fury. I am choosing to grind the the width a little closer to the original size, open the holes for the bolt head like you did, then install. Thanks again!

Did he say if the material was rubber?

Great show again. You captured my 66 Fury Red Convertible in 3 great pics!! Thanks for all the other pictures.

Trying to figure out what the 4 wires for a console tachometer 1967 and newer. There is a black wire(which I believe is ground), orange, green and purple. Anyone know the wire hookups?

Posted pics of my car, will add some of the console a little later. Thanks!!

Posted pics. I posted a couple pictures of my Fury. I will take some of my interior so you can see my console. I did know I will have to change my column to a non shifter. Thanks!