Search results for query: *

Hello; I read through the threads about opening dormant tailgates if the power window will not lower. I have the opposite problem. My power window is down in the tailgate, which can open. I need to remove the glass so I can access fasteners for the trim. The shop manual says to remove the...

Hello; I recieved the following notice about a post I submitted about a C-Body in the local Detroit Pick-A-Part: Your thread 76 new Yyorker in Detroit Pick a Part was deleted. Reason: Selling a part? You need to start a sale thread in the proper classified forum. It is not my car, and I am not...

I am scratching my head on this, suggestions welcome. I have a pretty severe fuel evaporation problem on my 65 Chrysler 300 (383). It is stock, mechanically refreshed, with the stock AFB four barrell that has been rebuilt, new fuel pump, fresh filter, replaced pump push rod. Overnight or even...

Hi all; 76 New Yorker at Ryans Pick a Part, on Hubbel on the west side of Detoit. Reasonably complete, cloth interior, Autopilot. Mark

As above, they are at Ryans Pick a Part, on Hubbelyonythe west side of Detroit. The New Yorker's engne still in place, and is not all rotted out. Has A/c, and power windows but the switches are gone. The Fury III is a four door hardtop, not as nce, and my photo of it dissapeared. Mark

At USParts in Sterling Heights Michigan. No front bumper or grille now, not all rotted. Mark

68 Town & Country in the Pick-A-Part in Rialto California (LA area). 440 disc brakes, A/C car. Body solid but sunburnt. Mark

NOS part, box is dirty but the part is nice, still in the plastic bag. 1972 Fury 1 and 2 are the application. $10 plus shipping from Detroit, Michigan. Mark

Hi all; I recall reading that someone found a source for the cable that operated the turn signal switch. This is a Saginaw sourced tilt column, and a similar setup was used on both tilt and non tilt gm cars from about 1960 to 1965. The cable is 24&7/8 inches. All of the google searches found...

Hi all; 1965, 1966 Chrysler Dodge Plymouth Disc Brake Master Cylinder 2534325 | eBay Should have thought of posting this here first. This is a 65 or 66 single pot master cylinder for a power brake car. I have only seen one other in all my years of owning these cars. It is a core, but it is in...

Hello; Does anyone have one of these rods, or maybe a junk carb that still has one? The AVS and Edelbrock links are different, and since swap meets are defunct for a while there is no place locally to look for one. See the photo. Any help is appreciated. Thanks Mark

Hello; This is a new one. I have done photos in the past, but currently when i try i get a message in a red bar that says there is a problem with the upload. There is no other information. This is a nothing special camera phone photo, and I have tried to shrink it too, no luck. Any ideas? Thanks. M

Hello; I removed both front fenders from my 66 Town and Country parts car today. The first took 4 plus hours, the second one hour. You may be interested in my learning curve. There are a few tricks on this one that initially stumped me. I'll assume you know to pre-oil all the fasteners (Mopar...

Selling a C-Body station wagon rear A/C assembly with all parts needed to retrofit into another car. Originally from a 66 Town and Country from Texas, in good condition. Will work on any C-body wagon from 65 to 68. Have all parts including coolant lines, wiring, adapters, brackets, the plastic...