Search results for query: *

Does anyone have a picture of where their Fuel Pacer vacuum switch on their 1977 (or there about) C-body formal? I believe mine was cut out of the harness at some point. I have a blue wire that registers 12 Volts when the ignition is on coming off the driver's inter-fender harness closer to the...

Trunk lid for 1963-64 Chrysler New Yorker, Newport, Saratoga, 300 series. It’s in great shape. Rust free California sheet metal now residing in Calgary, Alberta, Canada because I’m weird like that. I think it might have been painted once before I owned it. $200 or best offer from a fellow Mopar...

She’s cracked! Anybody know anyone selling replacement diaphragms for mopar speed control units? This one is for a 77 but I think they were the same for a dozen years.

Does any one have a picture of the bezel for the 1963-64 Chrysler 300, New Yorker… etc rear power antenna and related hardware? In the pics in the parts manual it looks like a two piece item like the front fender bezel but I can’t for the life of me find a picture of what this should look like.

Untested as I bought it for the bezel but looks to be a good complete core for a re-cap. This is the model 351 Delco AM/FM installed in well-optioned 1963-64 Chryslers Newports, Saratogas, New Yorkers and 300s. These are hens teeth and are available on sleaze-bay for about $400. This one can be...

I ordered a rebuilt AM/FM radio for my 1964 Chrysler New Yorker project and didn’t realize it requires a bezel specific to it (doesn’t look like one I ordered has it) and the dash bezel below it is cut a bit different (the am/fm radio isn’t as wide). See picture. If anyone has one or both of...

Hey, I bought this rad on a whim hoping it would slot into my 1964 Chrysler project but it's not the same. The Field is 22" wide by 19" in height - I need 18" in height. According to the interwebs it corresponds to a 1967 C-body 440 Auto. If this is you - I have your radiator. I bought it from...

Are those windshields interchangeable? Look like they would be.

Looking for a little help here. I can't find a really good picture of the "three crowns" grill emblem for the 1964 model year of the Chrysler New Yorker. As I suspect those associated with these cars know, most of the inserts for these fell out a long time ago. I am in the process of making a 3D...

Stumpy's Yoga Studio Hey, started a YouTube channel January 1st - mostly dedicated to my ‘64 Chrysler New Yorker project. I’ve posted 5 episodes now with a new one up tomorrow. They run about 15-20min each, cost nothing and, I’m told get progressively more entertaining as they go. If you watch...

Hey, So I am putting my engine together for my '64 NY and it's going well so far but I am trying to track down these spark plug wire grommets. They fit in the arms coming off the valve covers (presumably to keep the wires off the exhaust manifolds) the places that have them (eBay and Classic...

I need some help guys, I am trying to track down a paint color for my Canadian 64 New Yorker. I had a paint code match on PP and PP-1 from a dodge book from 1965, and it was a "Ruby Red" - it's not the color. At this point, I believe that there are specific Canadian Paint codes for Chrysler for...

Free to pick up. Calgary AB, Canada. I’m around all weekend. 1964 Chrysler New Yorker Windsor Saratoga 300 | Auto Body Parts | Calgary | Kijiji

How do you lock/unlock the doors without a key on the 1964 Chrysler 2-doors? (Windsor, 300, Newport, New Yorker). Haven’t got that far in my New Yorker project yet and I can’t figure out from the door card. On the four doors there’s a mechanical switch. There’s nothing on the two doors other...

Tackled an annoying little job on Thelma over the weekend. Her horn has never worked since I've become her caretaker and it started to become an issue for me as being voice-less in traffic kinda sucks. Sometimes you need to express yourself. I tracked the issue down to a bad column on the...

Our family pet c-body Chrysler "Thelma" (named after Thelma Houston) was the recipient of a Holley Sniper EFI setup on top her 400ci engine last summer. I had been fighting with the Thermoquad (and even a rebuilt Thermoquad) for too many years - I'd had enough. Of course the upgrade led me to...

So I've had my '77 out in Kelowna as my vacation car over the last few summers and she has a "bit" of a stumble under hard acceleration - she'll stall at a light or merge if you get into her so you have to be very careful. She lives at my inlaws' condo so wrenching on her myself would be quite...

Hey, Just wanted to introduce myself, my name is Angus and I am from Calgary, Alberta. I have been a member for awhile but have just been on the sidelines. I am currently in an intensive restoration of a basket case '64 New Yorker 2-door pushbutton automatic restoration. I restored a 1976...

Trying to cleanup the wiring on a 77 Newport with auto temp 2 a/c. Noticed the a/c relay (yellow wire black stripe) is a spiced connection from before or after (black wire white stripe) the fuse panel. It's crimped on with a large yellow crimp connector. There is another red wire w/ an inline...

Parking the 1977 Newport in the shop last fall I bashed the front driver's side signal light lens. It's the wedge design that juts out a little on leading edge of fender. Fast cash for a reasonable replacement if anyone has one. And am still in the market for a foot seek button for same - and...