Search results for query: *

HELP!!! On my way to work the other day , approximately a 25 mile ride one way, my 67 Fury III just quit on me. It's a newly rebuilt 440 engine with Pertonix ignition parts, Ignitor III module and Flame Thrower II coil. The car will not start and I'm stumped, hopefull someone can offer some...

Hello everyone- I'm planning on washing my car pretty thoroughly this weekend and attempting to use boiled linseed oil to give it some shine again. The paint is all original, 67 Plymouth Fury III, but no where near show quality. It's not in the budget to paint anytime soon but i wanted to get...

How many shade tree mechanics does it take to change a light bulb? Does anyone know if you can change the lightbulb in a fender turn signal for a 1967 Plymouth Fury III? My passenger side is out and after removing the allen head screw from underneath and spraying with half a bottle of WD-40...

Question for all you car nuts: Why would my newly installed electric oil pressure gauge be reading over 100 psi? My engine builder tells me I need to install a mechanical gauge but I don't understand why? The oil gauge and sending unit all came from the same kit but the information it's showing...

menu craigslist > for sale postpost to classifieds [ accountmy account ] 0 favorites CL area milwaukee > section for sale > category cars & trucks - by owner reply ✉ ☎ reply x prohibited[?] Posted: about 2 hours ago ◀ prev ▲next ▶ print 1966 Plymouth Fury Sport Comando - $3000...

Does anyone have the electrical connector shown in the pic below. It is part of the engine wire harness that connects to the starter relay and connects through the firewall to the bulkhead connector. It's an 8 pin connector and for my 67 Fury III with 318. I'm in Lansing Il 60438.

http://chicago.craigslist.org/nwi/cto/5053667805.html 64 Dodge 4 door parts car 383 4 barrel with push button automatic, power steering, power brakes, fairly complete car for parts. Rusty rear frame rails and lower quarters, no title. Nice front end parts and dash, aluminum intake, complete...

http://chicago.craigslist.org/chc/cto/5067309074.html Was this posted previously on here?

The engine is coming along. My engine builder just sent these pics and I'm downright giddy!!!

http://chicago.craigslist.org/wcl/cto/5008343462.html Not mine but figure someone is looking for a project.

Ok guys, I identified why my windows on my 67 Fury III have not been operating the way they should be. On the hinge side of the full size window for driver and pass door the weather stripping (semi-clear pastic piece) that rides in the channel and has 2 pins that keeeps the window straight as it...

I chnaged the rear leaf springs and shocks on my 67 Fury II 2-Dr and have a 6" difference in height between passenegr and driver side rear. I swapped the springs to see if the lean moved with the spring and it remained the same ( passenegr side). I see no damage to the frame or leaf spring...

Hey everyone, I pulled the front brake assemblies off of my 67 Fury III. I am selling them if someone wants them. You get the drums, brake back plate flexible hose and all the hardware in between. The drums are good and can be used but the rest is usable but I'm sure you'd rebuild. The bearings...

Has anyone out there purchased suspension products from General Springs out of Kansas City? Their prices are the most reasonable for leaf springs and installation hardware but like grandpa always used to say, You get what you pay for. Thanks in advance. Ernie

Happy New Year to everyone and hopefully you all get that project finshed, purchased or sold. Does anyone know if the transmission linkage from a 67 plymouth fury III, 318 equipped car with auto 727 will work without modifcation in the same car with a 440 and auto 727? The engine is out being...

I picked up a set of 66 PLymouth Fury Sport headlight bezels and no longer need them. I also have a passenger fender chrome trim piece that sits in front next to the bezel. If anyone is interested please let me know. Possible trade for some 67 Fury III parts. I'll have pics soon. They're in...

OK kids, where can I find replacement torsion bars for my 67 Plymouth fury III? I can't seem to find anyone that has this part available. I haven't taken mine out to measure the length and shop by dimesnions. Ernie

Does anyone know for certain if a transmission crossmember from a 66 sport fury auto with 318 will fit in a 67 Fury III with auto and big block 440? Any help would be great. Thanks.

Hello everyone- I'm in the midwest Chicagoland area and just picked up a pretty solid 67 Plymouth Fury III. I'm happy to announce that it will get an upgrade in the HP department with a 440 installed once it's back from the shop. The car will be kept pretty original and hopefull on the streets...

I checked the other threads but couldn't find an answer. The question is: Will the transmission crossmember from an A or B body car for a big block with automatic fit my newly acquired 1967 Plymouth Fury III 2 DR Hardtop with automatic 727? I plan on throwing a 440 mated with a 727 but need to...