Search results for query: *

The Big Easy Mopar association held their annual all Mopar show in New Orleans earlier this month in Chalmette Louisiana. Friday was the optional pre show tour. We were taken on a swamp tour tour. always interesting, Then bussed to a huge NASA base in Mississippi. The day ended at a huge Cajin...

1961 Plymouth. does anyone know what type of ground strap was used between the body and engine? also, where was it located. Thanks Will

I need one 1969 Chrysler 300 tail light lens. used with minor cracks OK. right and left are the same I think. It's for a wall hanger assembly so cheap is good.... Thanks Will.

A set of 5 matching wheels made by Motor Wheel for Chrysler Corp cars from 1955 to 1961. 5 X 4 1/2 inch lug pattern. All codes match. No bent rims, curb rash, rust, bent spokes. 48 spokes. 4 have tube liners. Wheels have been glass bead blasted. Will require rechrome or paint. Also includes 4...

A couple of things needed for a 1961 Fury convertible. I need one shoulder bolt for the folding top frame. it has a thin profile hex head, then a shoulder that passes through a main rear top support brace and a fine thread stud. There are four per top, one of mine got legs. Also need a carb air...

NOS genuine Mopar rear bearing kits, part # 3683956. in original boxes. Includes inner rear seal assy. collar, cone (bearing) assy, cup, brake support plate gasket, bearing retainer gasket, (foam), outer seal, Instruction sheet. I have two. one box sealed. one box opened but complete. Both for...

A NOS in original box Horn switch. 2822126. Fits many 60's/70's applications. A, B, C, E body and trucks. $74.95 plus postage from 36265. Thanks Will.

Tag number 2444853. IBS 4013 AS 163. OEM application is 1965 273 HP. This dist will fit all small blocks including 273, 318, 340, 360 and 318 POLY. Complete in good condition, needs a clean up. cap has a chip at the base. $195. plus the postage. Located at 36265. Thanks Will.

We had a mishap and now need any and all moldings and trim for the left front fender on a 1968 Plymouth Fury VIP. Wheel opening molding, side trim, headlight molding, etc. Any help would be appreciated. Thanks, Will.

Mopars at the battleship will be held on April 27 and 28 at battleship park in Mobile Alabama. Hosted by the Big Easy Mopar Association. Visit their website, (BEMA.com) for details. A meal cooked on site by a staff of Cajuns is featured on Friday. Saturday is show and swap meet. Come on down...

I ran up on this Magnum R/T and couldn't resist. I always liked these cars. Kinda the predecessor to the Charger and Challenger. It's a 2005 and was built in June of 04, so it's a very early car. It has a 5.7 Hemi with a 5 sp automatic. 86K miles. It's great road car. averaged 22.2 MPG to New...

the Big Easy Mopar Association held its annual show in New Orleans/Chalmette La this past week end. Friday we toured the city on tour busses before boarding a stern wheeler riverboat and traveling down the Mississippi river to the site of the battle of New Orleans. Then back on the bus and taken...

Anyone know what the difference is between a non power and power brake master cylinder on a 61 forward look car? I need a reman or new cylinder for my 61 Fury W/power drum brakes. Thanks Will.

This is a mostly complete 1956 DeSoto 330 CID engine. Block has been hot tanked and has new cam bearings and core plugs. Looks like it needs to be bored, original heads and valve gear in good condition. Pistons, rods, lifters, front cover, water pump, dist, mounts....... Whatever is in the...

Mark & Tammi Crowe, owners of Streetscene Auto Restoration and the fellow who did all the body and paint work on Virgil, hosted the third annual car show here in Alabama Saturday. Started out cool and cloudy and progressed to cold and breezy with some light rain but still enjoyed a good turnout...

The Music City Mopar show is this weekend, (Sept 23-24) at the Wilson county fairgrounds in Lebanon Tenn.

Has anyone got contact information for QQE, the folks in PA who reproduce parts? Thanks Will

A V10, 8.0 Magnum Dodge truck crate engine. 1994-2003 2500 & 3500 series trucks. Engine is complete including wiring harness and computer, coated exhaust manifolds/headers, front dress, A/C compressor, P/S pump... etc. Engine has never been fired. The truck it was bought for was sold long ago...

NOS in original box horn switch part #2822126. Firs 66-76 A-B-C-E Bodys and trucks. $49.95 plus $5.00 shipping. Thanks Will.

I'm looking for advice and information on converting my single reservoir master cylinder to a dual reservoir. Brake line routing, do I need a line equalizer, any other parts? It's a 64 Dodge D200 with non power drum brakes.