Search results for query: *

My 69 300 with the 440 motor has a oil leak coming from the gasket area of the oil pump, have removed the 4 retaining bolts but the darn thing wont come out it turns freely but just wont budge out of the side of the engine. Is there something holding in in? or do I give it some encouragement.

Hi George, do you restore old wheels? I am in Australia and have a 58 Desoto wheel that needs to be done. Bob

It was the talk of our town last night, the Christmas party ended up around the car even had to take a few of the Christmas elves for a ride. The BBQ was great the beer freezing cold ( its red hot here at the mo about 44 degrees C ) and the cat stole the show!

Hi Dabolvr, He said people get confused on how they work, in the relay there are actually 2 coils, one to open and one to close. Mine did the same as yours would open but not close. Now they do it all straight away. I will ask him to post a fix for everyone on this site.

A A couple photos

Hi Guys, The colour is actually the light mint green a standard factory colour but always shows up as light blue in a photo, any way we got it in last Feb from the States and today my wife finally gets a ride to a party and back. Will take a few photos of the ride, will be entering it at All...

Thanks Bluefury

OOPs I also forgot to ask, where do the washer jets go for the windscreen washers, I cant find any holes in the hood to screw them in, please see photo.

Hey All, Finally went for a ride in the 300' all fixed had the auto sparky go over the whole car this guy is great had the hide away headlight problem fixed in 10 minutes! The rest took 14 hours? The car sits nice and drives so nice I am amazed, but we have ordered a full new suspension kit and...

Hi Big John, Thanks for all that!! will try it out. Bob

Great work Commando!! Does that mean that the original headlight door relay actually has 2 relays in it? I am not much of an auto electrician. Bob

UGhg!! just checked the coloured wiring diagram from classic car wiring (917)8619131 and it shows the following..................... green wire from hidden headlight relay goes to a splice to the beam selector switch the other goes to the light switch...simple which one is power? The black wire...

This is all a bit strange as I too am having problems BUT I do not have door locks etc. The headlight motor relay caked itself before I got the car, some bright spark decided to just cut the wires that control the headlight motor on the engine bay side of the fire wall and run two more wires to...

Hi Caper, Yes I know we are not that daring when it comes to the cold, but we get some pretty hot temps in Summer!!! Bob

I am sure that different sales people we talk to might not be familiar with our models, but I do have a cover, a new one with Legendary's monogram on it that came with the car when I imported it from National Muscle Cars (" being an auto sales company they are like most I suspect, do as little...

Hi Big John, Tried that they only sell complete covers with the push studs and I did not want that and that price was US$ add 29% to the AU$!!! Bob

I had been searching on most Mopar sites for the clips that sew in to the cover when the top is down and found out that the part number was dropped ny Chrysler in the nineties. However I did find out that the part number is 2878538 and these are simply not available anymore but another clip sold...

Also those that are contemplating this job note in picture #4 you can see 3 small bolts sticking through, I did this to ensure the badge holes were correct as these 3 holes are not cut when supplied. Put 3 small bolts through the top 2 end holes and the centre bottom hole then screw down the...

Hi Thrashingcows I know what you mean better to go easy and steady because if you put too much powder in and the adhesive does not go all the way through it will come apart fairly easily. I drilled a hole so I could put a small amount of powder at a time and it has worked very well in this...

The new speaker grilles arrived in Australia this morning from Bildog who arranged manufacture of them and I have to say you can not tell the difference between the old and new apart from the fact that they are much stronger due to being made out of stainless instead of aluminium. I couldn't...