Search results for query: *

For sale a new never installed Orange Super Commando 383 pie tin used on some 70 & 71 cars. PN: 4529081. I bought this many years ago with plans to use it on my 65 Fury but it doesn't fit my air cleaner. $78.00 shipped to USA from 54703

This License plate frame was removed from a 1960 Dodge Dart but is the same for Polara and Matador. I had it Re-Chromed years ago and it has been in my loft for way too long. All studs are intact and is ready to install. $110.00 shipped in USA. Out of Country will add shipping cost.

I have a pair of "Phoenix" nameplates removed from a 1960 Dart many years ago. They are as nice used as what is out there. No crazing or pitting and complete with mounting nuts and all pins. Also have the deck lid "Dodge" nameplate from the same car. I was saving them for my car in the "just in...

Transmission Cross member removed from a 1966 Fury 383 Auto. Good condition with minor surface rust. $110.00 shipped from WI 54703 to USA mainland. Out of country will add shipping costs.

Here is a Ring and Pinion I removed from a 741 case that had a junk carrier. Ring and Pinion, bolts, bearings and races are included and are in nice shape. It will only fit the 741 case. 5/11/68 build date. $20.00 plus shipping.

Used map light removed from a 1960 Dodge Dart. Has pretty nice chrome and a working light bulb and socket. Small lens crack as seen to the left of the right side screw from being over-tightened. Has enough wire to reach the dash switch but needs terminal ends crimped on. I'm not positive but I...

This is a nice presentable nameplate for a 66 Sport Fury dash. It measures 3 1/4" long and it is a one year only part. Comes with mounting nuts. $25.00 shipped to USA from 54703

This is a hard to find console wiring harness with lighter set-up for a 1965 300 L in nice condition. The lighter is complete with circuit breaker and uncut harness for shifter and console lights. No console or end plate. Only parts as shown. $110.00 shipped in USA. Out of country shipping will...

Looking for some leadership on removing the steering column on one of these cars? Does it require removing the steering gear assembly? I started by loosening the collar at the firewall and removed the boot around the column but how is the column separated from the gear itself? I couldn't find...

My 60 Dart has developed a leak around the kick down lever. Anyone have experience with replacing the seal? Pretty sure I need to drop the pan and valve body to get at it. Is it a standard O ring or does it take a special seal. Any tips on this operation would be appreciated.

I am looking for some leadership on adding front seat belts to my 60 Dart. The car has been 100% correct from the factory until recently when I swapped out the dual cylinder front drums and single master cylinder to disc brakes for safety sake. My issue now is to add front lap belts for the same...

These are new (outer only) Cat whiskers marked for 1965 Sport Fury that I bought years ago for my 65 Convertible before the Convertible pieces were being made. I had intentions of cutting them to fit but before that became a reality, I was able to buy the correct Convertible pieces. These have...

I have a 30 plus year subscription for Mopar Action and Mopar Muscle along with quite a few Mopar Enthusiast, Chrysler Power and Mopar Performance that I need gone. I thought I would offer them here to see if there is any interest before the go to the recycle bin. Most are in totes but I took a...

This radio was in my 1965 Sport Fury when I bought it in 1985. It worked fine but not many AM stations here in Wisconsin so I replaced it in 1987 with an AM/FM radio. It has been on a shelf in my loft since then. I tested it today and it still plays great. The buttons and tuner all work...

I purchased a pair of drums from "Old Parts" on Ebay that claim to fit 57-59 Plymouth. My parts list shows 57-61 Chrysler cars with 11 X 2" brakes used PN 2200134-5 drum and hub. My problem is the replacement drums have a 3" hole whereas my factory drum has a 2.75" hole. My concern is with the...

Does Steele or Metro Moulded parts make reproduction door seals for the Forward cars? Or are we stuck with generic weatherstrip. My 60 Dart door seals are getting to the end of their life. I have been unable to find any info on them.

I swapped my front drums out for Disc's many years ago on my 60 Dart. May have used synthetic fluid at the time but don't remember. Recently checked the fluid and added some dot 3. Now my brakes are locking up after a short drive. I suspect the new fluid is not playing nice with the old and...

The dash lights have stopped working in my 60 Phoenix. I suspect it is a blown fuse but can't seem to find where it is located. All of the other dash and dome lights are working. I noticed my gauge illumination unlit while doing a check to make sure all bulbs were working. I don't drive the car...

Anyone out there in the Forward group have an extra axle for my 60 Phoenix? 57-61 Dodge, Desoto, Chrysler and Plymouth with 8.75 Rear end should work. All V8's and some 6 cyl cars used the 8.75 Carrier. The Axle shaft measures 31 5/8" and both sides are the same. I guess mine has always been...

I bought these mufflers many years ago with thoughts of installing them on my 60 Dart but never did. They are the crimped corner mufflers used on some of the cars back in the day. I do not have a specific application for them but they have a 2" inlet and 2" outlet. I paid $60.00 for them at the...