Search results for query: *

  • Users: A38E86D32
  • Content: Threads
  • Order by date
  1. A38E86D32

    Engine run stand, which flywheel?

    I've got a fresh 440 engine i want to fire up on an engine run stand. It's internally balanced. I've also got an empty 727 case I'm going to use behind it , for something to mount the starter to. The starter is a new early 90s style mini starter (like used on a dakota). Now a flywheel. Do i...
  2. A38E86D32

    My '71 Plymouth

    Some old photos of my 1971 Plymouth Fury III and also a few new ones. The two primered photos in the driveway are circa 1987. The black photo is how dad purchased it, 1974. The last 2 are 2018.
  3. A38E86D32

    Has anyone used Summit Turbo XL mufflers?

    I've purchased a 2 1/2" TTI system without mufflers for my '71 Fury. Originally purchased Flowmaster Super 44s of the correct configuration, had extentions welded on the inlets to make up the shorter length, then had the entire system ceramic coated black. I'm getting older and loud exhausts...
  4. A38E86D32

    NOT MINE Not mine 1971 Plymouth Fury Police Pckg 440

    Found this on ebay. 2nd time it's been on there so i figured I'd share. 1971 Plymouth Fury | eBay
  5. A38E86D32

    WANTED 1971 Vapor separator tank

    Hi, Looking for a decent vapor separator tank that mounts in front of the gas tank for my '71 Fury. I have paypal. Thanks!
  6. A38E86D32

    Calling on Build sheet decoders

    For 1971, what would be the number in the "tire" category for a vehicle using G78-15 tires? Thanks in advance!
  7. A38E86D32

    440/727 Flexplate?

    I'm at a bit of a dilemma here fellas. I have a fully rebuilt engine and transmission. Car of subject is my '71 Fury 4 dr sedan. Engine dyno'd at 410 horsepower, trans has 22-2400 stall converter, shift kit, rear is 3.23s. I purchased an ATP flexplate with the correct 6 bolt crank, 10" spaced...
  8. A38E86D32

    Autozone 5300 rotor

    Hey all, So i pulled the trigger. I couldn't bring myself to pay $395 for a set of rotors for my '71 Plymouth Fury from a known brake parts source. I purchased AutoZone's 5300 front rotor instead. I hope i have good luck with them, I'll let you all know how the quality is with them once i...
  9. A38E86D32

    1970 and 71 plymouth fury wiring harnesses

    Are they same? Engine, front lights, rear lights, dash, ac wiring? I'm guessing they are. Just wondering if anyone knew for sure. TIA
  10. A38E86D32

    SOLD C Body d/s HP exhaust manifold

    For your consideration I have for sale a driver side HP exhaust manifold, no cracks . $150 obo plus shipping. Paypal preferred More pics available upon request Thanks!
  11. A38E86D32

    How many yards of material for seats?

    I was wondering how much of the patterned material and how much vinyl material, in yards, i would need for the interior of my '71 Plymouth Fury III? Thanks!
  12. A38E86D32

    Exhaust coatings, powder coat and ceramic coat

    I am having my 440hp manifolds ceramic coated. I would like to have my new exhaust system coated too. One of the powder coat shops i talked to says i can powder coat the exhaust piping, that ceramic coating would be over kill. What do you guys think? I would think that exhaust gets too hot for...
  13. A38E86D32

    72' imperial 440 to 71' HP spec

    Hey guys, My 71' troop car lost it's original 440HP engine long ago. It's since been replaced by a 72' imperial 440. The engine runs OK, just doesn't have the grunt I'm told the original mill had. Even though it's not the correct dated block, I'd like to build it to 71' HP spec. I'm thinking...
  14. A38E86D32

    WANTED 1971 plymouth fury parts

    Hi everyone, I'm looking for a good front lower valance part #3443446, hood release cable and clamp assembly, and the "strut" that goes between the hood latch bracket and the center grill support. These are the last pieces i need for my plymouth (pretty sure). Thanks! -Marc
  15. A38E86D32

    71' police package rear pinion ???

    Hey guys, My plymouth has the 8 3/4 rear with 489 case. I think its a 3.23 open. Is it a fine spline or coarse spline pinion? I know there were two types for the 489 case. Just wondering what ot SHOULD be... Thanks
  16. A38E86D32

    For Sale 440 kickdown linkage

    Late 70s 440 kickdown linkage. $120 obo +shp. PM if interested. Thanks!
  17. A38E86D32

    Fender tag stamp, Newark plant

    Hey guys, Ordering a new fender tag for my 71' plymouth. It's very corroded. I'd like to duplicate the number stamp the factory puts in the upper right hand corner. Any ideas? Thanks
  18. A38E86D32

    WANTED 1971 Fury parts

    I'm looking for the following : A/c accumulator/drier and bracket Wiring associated with the ac clutch and drier 3464 493 "strut" that connects the hood latch bracket to the front bumper center support bracket. Front lower Valance #3443446 in decent shape. Thanks! -Marc
  19. A38E86D32

    Fuselage windshield, new available?

    I may be popping out my 71 fury windshield to do bodywork and reseal it. I was told the glass MIGHT break. Is there a source for a new windshield just in case? Thanks! -Marc
  20. A38E86D32

    For Sale NOS 1971 C Body dash trim

    Any interest in this? Bought it for my 71' Fury. I have no use for it now. Bought as NOS, never mounted. $60+ the ride. Paypal preferred. Thanks! -Marc
Back
Top