Search results for query: *

Looking for a Dodge Ram dealership sign such as pictured below. Could be different in size or shape, but needs to have this Ram logo. I've seen these in the $200 - $400 range and they are usually 36" x 48" in size. Can pick up in Illinois, Indiana, Missouri, Iowa, Kentucky, Tennessee, or Michigan.

I dug through the classifieds here, but didn't see where this car had been covered. I'm sure it has and I just didn't find it. Looks to be an R6 T-code from Illinois. Dealership sticker says Carlson? Skip to 3:35 to see the car. Video by Mopar Connection Magazine.

I'm needing some help finding a 2899879 casting number exhaust manifold. Date code not important. This would be a passenger side big block manifold. Picture below for reference.

I'm looking for a used orange 440 Magnum pie tin or engine ID plate. A ding/dent/scratch or two is fine as this is going on a car that has not been restored. Photo below for reference. And, yes, I've already checked with the usual suspects to confirm that these are not currently being reproduced.

Under dash mechanical gauge set. Napa part # 501-1456. No longer available in stores. Oil pressure, amperage, water temperature. Neat vintage piece that would look great on a day 2 style build or on an engine stand. $22 plus shipping from 62450. Will ship to Canada.

Gauges from a 1966 Plymouth Fury. These go on the left side of the dash. Seem to be in pretty good shape. I've had them in storage for about 20 years. Temperature - part # 2496452 Alternator - part # 2496453 Fuel level - part # 2496451 $10 each plus shipping from 62450. I also have the mounting...

11" x 2-3/4” front drum brakes. Removed from a running/driving car, but could use a refresh. Includes drums, hubs, backing plates, and hardware shown. All studs are RH. Spindles not included. New hardware is available and recommended at RockAuto. Shoes are junk and will be removed for shipping...

Removed from a 1970 B-body 8 3/4 rear end (big bolt pattern). They come with all the hardware shown in the pictures, although I'll probably discard the shoes before shipping. $120 shipped to the lower 48

Vintage Mr. Gasket shifter handle. Thick and heavy duty. Neat old piece. $45 shipped USPS flat rate

Hurst Indy shifter handle. Has been straightened. Was in my '67 Satellite and worked well for the application. $28 shipped USPS flat rate

11 x 2.5" front drum brakes. Removed from a running/driving 1970 Plymouth GTX. Includes drums, hubs, backing plates, and hardware shown. All studs are RH. Spindles not included. Location: Olney, IL 62450 $130 plus shipping

Five original left hand wheel studs. Removed from a 1970 B-body 8 3/4 rear end. $20 shipped to the lower 48

Bellhousing (clutch cover) off of an NV4500 5-speed transmission. Will fit Dodge small block bolt pattern (5.2, 5.9, 318, 360, etc.). Good shape. Comes with transmission hardware (the 4 big bolts). $165 plus shipping from 62450

I was offered this '68 Sport Fury by way of "if you can haul it, you can have it." I don't own any C-bodies, so I figured I would post some pictures here to see if anything there is worth saving. Looks like it's a 318 automatic, 8-3/4 rear, buckets with buddy seat, power steering, drum brakes...

(7) headlight rings with (3) mounting tabs (2) headlight rings with (2) mounting tabs $30 shipped USPS flat rate for all of them

Multiple cast iron 440 intakes for sale. All are the 2806178 casting number which is correct for '67-'69 440 engines. Date codes available: 8/10/67 8/19/68 10/28/68 11/4/68 $20 each plus shipping from 62450

Anco 16 wiper arms. Stamped with part #'s 3006015 and 3082026. $20 plus shipping from 62450

6 blade flex fan, 18”. Worked fine, just replaced with a factory fan. $37 shipped to the lower 48

Triple gauge set - oil pressure, amperage, water temperature. Been sitting on a shelf for years. $27 shipped in a flat rate box

Cast iron factory alternator bracket. I believe it is for a 1967-1968 big block with air conditioning. Also comes with the lower adjustment bracket, but it's been modified (cut and welded) so I wouldn't recommend using it. Came off of a running 383 as is. $20 shipped in a USPS flat rate padded...