Search results for query: *

Hello, I'm looking for the triangular plastic which holds the light. Driver's side (aka left). The one I have is black. I probably won't say no to a matching pair. Thanks & happy motoring.

Just an unsolicited update on a longer project - the Windsor to 300 clone project. Trying to keep it 'in the family' Mopar family that is, my next stunt is to try to add in 12V alternator and PS pump. Originally the car came with a 6V system, a combination 6V generator and power steering pump...

Hello Fellow Forward Lookers, I'm hoping someone can share the knowledge if they have it. I've been mincing along on my Windsor-300 clone project for about 5 years now. It was someone else's abandoned resto project that came in pieces. The only bumper frame bolt that wasn't blue-wrenched off is...

Hello C-body Fans, I stumbled upon this pic while pawing through FBM the other day. Fairly certain I've never seen a luggage rack on a slab era C-body. (wagons, yes - roof mount). Does anyone know if they made a factory option (non-aftermarket), for slab trunks? Shared wisdom appreciated...

Hello Fellow C Body Enthusiasts, Although I've tracked down 5 or so sources for inner and outer window whiskers, they all are 'out of stock' on the 68 Newport fastop option, (& verts for that matter).. I can get generic pieces, where I trim down the pieces and perhaps bend the rear units, but...

Hello Everyone, I'm looking for manual window (rear) both sides window regulators for a 1968 Newport. Thanks, Mike

Hello & Happy Spring. I'm trying to find a bucket seat trim (guard?) around the drivers seat, (the little chrome seat adjusting arm/nob) similar to the passenger side shown in the attached photo. Also, hunting for vinyl top chrome/stainless trim for same ride. Thanks and happy motoring.!!

Hello Mopar Fans, Looking for names of the rear seat styles for the three different styles in photos below all from 68 Newports. The teal and white has no 'notch' in the middle of the back seat, the grain is well... bucket-ish... from a hard top. I would like to use the front (split with arm...

Has anyone noticed some steering boxes do not fit? They look ok, holes sort of line up, but when you go to tighten them up to the frame, it gets pulled way out of position, and unusable without modification. The ones with a point on the south side, are correct. The "before" pic, in the car...

Hey Everybody, HISTORY: It started out as chasing down why my headlights don't work. The head lights initially (as received with Rupert) only worked on high beams only, leading me to start with the hi-low dimmer switch (on the floor). The wiring looks fine, and checking out the functionality...

I'm looking for strut rods for my 68 Newport. If anyone has a an extra set, I'm happy to turn them into cash. Thanks, Mike

Hello Chrysler Fans, Working on an original AC car, but I'm missing the AC line/hose from the compressor over the radiator to condenser coil. So, I do not have the fittings to add a new hose to, and am looking for a source where I can press a button and buy it complete. Any worthy sources...

Hello Fellow Mopar enthusiasts, Has anyone installed a rear anti-sway bar in a C-body? If so, would you kindly share a photo or 2 of how you mounted it to the frame? Thanks, Mike

Hello, I'm looking for a matching set of side view mirrors for my 68 Newport. Other years/models considered. thanks, Mike

Hello Chrysler friends, I'm away from my shop manuals, but would like to order some U-bolts while on the road. Does anyone know the "B" dimensions - inside diameter of U-bolts over the stock 8.75" rear axel and "C" dimensions - length of U-bolt from inner radius to end of threads? I'm...

Hey Fellow Chrysler Fans!. I'm looking for a complete center console with linkages and all the parts from the tranny back. As best of shape as available. Thanks, Mike

Hello Fellow Chrysler enthusiasts, I have a working 6V (positive I think) generator and power steering pump combo unit, and am looking for help on rebuilding it into a 12V unit, or better yet sending it to a shop that specializes in this. Any help or advice is appreciated. Thanks, Mike

Hi, I'm looking for NOS or used or remanufactured tail light lenses for my 55' 300 clone project. Any help appreciated. Thanks, Mike

Hello friends, From my reading, swapping the heater core, pound for pound, looks like it is probably in the top 5 most tedious replacement jobs for a 68 slab. I really don't want to do it more than once. Does anyone have a source for a new or like-new package for this swap? Not just the...

Hello, Currently in search of a replacement filler tube, from the tank to the gas cap (behind license plate). Checked E-bay, Rockauto, and many others, no dice. Anyone have a reliable source for the filler pipe? thanks, Mike