Search results for query: *

  1. M

    alt upgrade 1968 to 1970 two field

    Picked up a two field alt and regulator. The new alt has a smaller pully 2 1/2" OD old alt and not sure if it had the correct pulley was 3 1/4" OD. This will spin the new alt faster. Is this OK? This is for my 1968 300 with A/C. Lost alt on the way back form car show Saturday. Cut belts off and...
  2. M

    need power antenna information 68 300

    Looking to find and replace the antenna on my 68 300 with a power one. It looks like a tight fit. Did this year have the antenna that did not go all the way down? Is there an after market one or can I find one used and rebuild it. any one do this.
  3. M

    How to remove and replace back seat 68 300

    Can you remove and install the upper rear seat on a 1968 300 with out removing the speaker grill ? I install the speaker grill and can not get the seat over it.
  4. M

    help with 68 300 center arm rest brackets

    Can someone post a picture or tell me were the center arm rest bracket welds to the drive line tunnel floor. It looks like they weld behind the too humps on the tunnel. They may go in front of the humps. I do not think they mount on top of them. I know if someone has a 300 with the seats out...
  5. M

    need 68 300 back seat

    I put a post in the wanted forum no luck. Hoping to finish seats for car show next month. In northern California. Has any one seen a 68 300 upper back seat for a bucket seat car. The frame I have is rusted out.
  6. M

    WANTED 68 300 back seat

    Need the upper back seat the one with the speaker drop in the center. Bucket seat one. Just need the back. any color. I live in central California.
  7. M

    WANTED 68 300 rear seat

    Need a 1968 300 rear seat . Bucket seat type. Just need the upper part any color. Just needs to be recoverable.
  8. M

    Remove and replace 68 300 vinyl top trim?

    My next project is to replace the vinyl top. Any help on removing the trim would be a big help. The front W/S trim looks imbedded in the rubber. Do you just pull it out or is there clips? The trim at the side quarter windows. Do I have to remove the in inside panels to get to trim nuts? I have...
  9. M

    Part # Headlight motor kit?

    Need part # for the Head light motor repair kit. 68 300. I fixed the motor switch. It worked good for the last month or so and then the gear striped. Old plastic?
  10. M

    WANTED 68 300 grill center bar

    Still looking for the red center grill bar for a 68 300
  11. M

    Part # grill bar? 68 300

    Can someone tell me the part number for the red center grill bar on a 1968 300? I need one.
  12. M

    Road trip Wildcat wrecking

    Looks like I will be taking a road trip to Wildcat wrecking. From Napa to Portland is 10 hours. After 3 trips to Navada to by the car the wife is not happy about this trip and will not be going. I do not need to go they can ship the parts but I love walkin around wrecking yards. I do a lot of...
  13. M

    Vacuum advance part number?

    My parts store can not find a part number for my vacuum advance chamber. I need an after market number like a napa auto parts number. 1968 440 points car. They only go back to 1971 with electronic ignition.
  14. M

    Mikes 68 300

    I will start my 300 project here. The first thing I would like to do is decode my fender tag. 12345678 AX TRM PNT U8S 4 0 8 1 M5X AA1 8B CM23 81 5 63 A29 180314
  15. M

    Home with new 300

    On the way home with the new 300 going over the Sierra's to my home in Napa California. Just got it home. Ran great.
  16. M

    NoCal wrecking yards?

    Is there any California Mopar wrecking yards I can find any 68 300 seats, consle.
  17. M

    magnum 500 wheels 68 300

    Would like to order a set of aluminum magnum 500 wheels. They come in 8X17 front 9X17 rear. Not sure about back spacing.They come in 5" and 51/2" I would like to order the 5" back space. I like the deeper dish look. Will they fit?
  18. M

    WANTED Ok new car need parts seats console

    Ok have car time to get to work. Need to replace the bench with buckets and console. I need a set of front 68 300 buckets any color, rear seat with the 300 seaker grill, Complete console. Also need the center red grill rib. Its just the center red rib in the grill. Its the only rib that unbolts...
  19. M

    Bench seat in a 300?

    Was there a bench seat option for the 300? If so can I replace with buckets and console.
  20. M

    WANTED 67-68 300

    Still looking for a nice 67-68 300. I have seen a ton of the Newports. Not one clean 300 hardtop. Not looking at converts. Was the 300 not as popular?
Back
Top