Search results for query: *

Good interior runs and drives great.Last 2 winters I installed gt mat new rug and put the door panels back on.Dash look great not just for the year and it all works minus the horn and radio.Late september I had the from end rebuilt top to bottom and installed new Nos pleasurizer oil filled...

hello all i have a 1965 plymouth fury for sale 4 door 65,000 or 165,00 not sure with an extra motor the car has the original motor with does burn a quart of oil every 200 miles or so but i think its valve seals.Can't see it burn it just on start up.If you want more info on motor feel free to PM...

hello i have a 65 plymouth fury 318 does anyone know where to get a one piece oil pan gasket i have the stock one but would like a one piece .thank you tony

hello all i have a 65 plymouth fury having basically a front end kit put in it i know the guys does great work.Question how much do you think parts and labor would be for this job.thanks for the help.

read my manual on how to do this but over the years people find different ways to do stuff.So i have this front end noise and i found it ,it is coming from the strut rod bushing near the front not near the lower control arm.while I'm here should i change just the front or is this something that...

im not big on fuel injection because my cost are what they are but i have a 1965 318 poly engine and was wondering what is recommended as a newer carb to use are you guys using and adapter to 4 barrel or a new drop in plug and play 2 barrel let me know.getting closer with my engine rebuild and...

hello all putting my rear main seal in my 65 plymouth fury 318 motor do you guys use any sealer in that block area and does someone have a pic of where to put sealer on that location.

question I'm doing one side of my leaf spring now the brackets look good on this side do they make replacements for these cars if so where and what to use thank you all just wintering along here trying to finish up a last project this winter feel free to tell me what's going on for your winter...

happy new year to you all and many thanks to all members for helping us all out or sharing there cars with us in 2018 many more posts in 2019 and good luck on your projects lets all stay in touch.

hello i have a 1965 plymouth fury its a 4 door i need the arm rest bases for it and the repo ones don't look like its the same size does anybody carry good used ones i dont care if the pads are bad just the bases driver or passenger.thank you

these door panels look original to me but you guys would know more than me any way in replaced the card board that was shot and fixed and patched again i used the board from home depot same thickness as the original and then painted the board with rustoelum black paint to block water and put in...

as we all try to do it yourself questions do arise here is mine.im redoing my door panels over the inside of the interior face is great the famed back board is bad got some new stuff strangely enough the stuff at home depot is the exact thickness just paint it with oil paint to protect it from...

on 10/23/2018 i finished up all painting on my engine just in time to its getting colder here northeast 65 plymouth fury i know its not the right color but i like it. what is those pictures below my post i didn't do that

i have a 65 plymouth fury 318 im trying too get a new double timing set on but for the life of me there is the 3 marks on the crank gear a for advance r for retarded and 0 for factory timing.when i put number 1 up they hollow zero on the crank gear is on the key way but there is another solid...

i have a 65 plymouth fury 318 motor im looking for exhaust manifolds for it both sides any help.is there any other years that might fit my needs let me know

i bought this engine from a guy who said it ran great he switched to a bigger 360 motor i have everything else painted and went to change my cam to a very mild cam very mild you won't even know its there.but look what i found keep in mind its been running like this

does anyone have an engine run test stand just like most of us its a one time use tool ill pay for my time let me know please.question how much does it cost to dyno an engine roughly.

hello im looking for a engine run test stand from someone to rent let me know please thank you

im looking to buy a new alternator for my 65 plymouth fury with a 318 engine.should i convert over to a different style alternator like a one wire if so whats the procedure i dont want to burn up my car electrical system.or stay with the original type.what have you guys done

hello all i have a 65 plymouth fury i need pics or a exploded view of the horn button assembly from the ring to the button and how it works becsuse i think i have all the parts to it but can't seem to make it work under the horn ring correctly.any help please