Search results for query: *

  1. SuperFlyTNT

    Picture of 65-68 4-spd transmission crossmember

    @rd92west ; thanks for the info. The setup of the metal bracket on the rubber isolator and how it extends towards the back of the car explains at least to me why the transmission crossmember has the two additional holes as marked up in attached picture. Those would give access to the bolts to...
  2. SuperFlyTNT

    Picture of 65-68 4-spd transmission crossmember

    @Big_John ; thanks! I actually forgot that I too have a 1965 parts book haha. Then perhaps the crossmember can accommodate both mounting pad positions, or at least should have the provisions for both positions?
  3. SuperFlyTNT

    Picture of 65-68 4-spd transmission crossmember

    @rd92west ; the 'standard 727' crossmember would probably work with a 70-74 tailshaft on an 833, as the crossmember mounting pad is in the same position. I was just wondering if you had a pre-70 C-body and you would be 'compelled' to using a pre-70 833 transmission with the correct transmission...
  4. SuperFlyTNT

    Picture of 65-68 4-spd transmission crossmember

    Does anyone happen to have a picture of the transmission crossmember used on 65-68 factory 4spd cars?
  5. SuperFlyTNT

    *Theory* on big block engine casting LL - RL - RS

    @commando1 ; what I want to achieve is to have a better understanding of the history surrounding the casting process of the big blocks and how those letters relate to it. And after the someteenth time I was asked the question what the LL means on 2468130 383 blocks, I started digging. I hope...
  6. SuperFlyTNT

    *Theory* on big block engine casting LL - RL - RS

    Thanks @300rag ; I know it is risky to make any sort of statement and/or assumption about cylinder wall thickness without actual sonic checking a particular block. I read back on the theory I posted in my original post and have to revise the piece about 413s that "...would have relatively...
  7. SuperFlyTNT

    *Theory* on big block engine casting LL - RL - RS

    Thanks! That is the same casting number and RS as on the blue block in my original post. Here is the picture from 440Source: picture courtesy of 440Source.com Casting 2205712 L S (361, Low deck Small bore according to my theory)
  8. SuperFlyTNT

    *Theory* on big block engine casting LL - RL - RS

    @CBODY67; thanks for your input. Both 361s and 413s were used in heavy duty applications, so it may be possible for both of them to be cast using molds that would yield a bigger cylinder wall, using the 383 B and 426w RB molds as a basis with the bore molds for the 361 and 413. This would yield...
  9. SuperFlyTNT

    *Theory* on big block engine casting LL - RL - RS

    Note to admin: if this is not the correct subforum, please relocate this post to the appropriate forum. Thanks Yesterday someone asked me if I knew what the cast LL stood for on his 383. Nit being exactly sure what it meant, I started looking around - including this site - and based on data...
  10. SuperFlyTNT

    For Sale 1969 plymouth police car

    Nice catch! It's obvious now why you need a passenger door... :-P
  11. SuperFlyTNT

    SOLD 69-71 Fury or Suburban: passenger front-door WTD

    I have a front door from a 70 Suburban. Tobias and I are already in contact. No expensive shipping, as I am a few hours away from him in Holland :-) FYI; The window frame on the rear doors on wagons have a sharp angle at the C-pillar as opposed to the rounded frame on sedans. You could probably...
  12. SuperFlyTNT

    WANTED 70 Suburban tailgate window motor

    Looking for a tailgate window motor for captioned vehicle. It is actually for my 71 Suburban, but the complete mechanism is missing from the tailgate of my 71. I do have a complete tailgate from a 70 Suburban I will be using for parts, but the motor is broken. I don't know if the 71 tailgate...
  13. SuperFlyTNT

    My 1973 Town&Country

    Cool wagon! I had one back in 2000 in the same colors, bought it in Salt Lake City with 70k miles. Drove it around Daytona Beach FL for a couple of months before I shipped it to Holland! Should you be interested in the future to add a trailer hitch to your car, I still have a NOS wiring harness...
  14. SuperFlyTNT

    4spd conversion for the 3spd Suburban

    Well, it has been a while. I had some time off to spend with my daughter, who was born on January 26 :-) This weekend I cut the floor and test fitted both hump and shifter. The latter I testfitted to check clearance with the dash. It still needs to go up a bit but everything looks good...
  15. SuperFlyTNT

    For Sale 71 Polara 440-6 4spd on E-bay.

    Does anyone know what type of hump was used on this Polara to convert to 4spd? Was it a factory style hump in the factory location? I am contemplating using the same 71-74 bench seat pistol grip handle, instead of the 70-style 'nordic walking stick' (which is still cool), but I was wondering if...
  16. SuperFlyTNT

    4spd conversion for the 3spd Suburban

    If you were closer, I could have sold you my bare A426w block. But I reckon you already have one? SuperFly TNT
  17. SuperFlyTNT

    4spd conversion for the 3spd Suburban

    Well, two weeks ago I got an E-bay link from a fellow board member regarding my quest for a C-body 4spd hump. Last week it arrived in the mail :) As some of you already know, I had bought a 318 3spd Suburban from 1971 less drivetrain and I have every intention of converting it into a 4spd. I...
  18. SuperFlyTNT

    SOLD 4spd hump

    Got one off E-bay. Thanks for the link, @Ross Wooldridge :-) SuperFly TNT
  19. SuperFlyTNT

    WANTED 68-71 C-body big block HP exhaust manifold driver's side

    As the OP or TS I will allow this off topic topic ;-) And I will add to it; in Germany there's a 68 Valiant 2dr sedan with a 383 and the B-body HP driver's side exhaust manifold mated to it. Manual steering 4spd car as well... SuperFly TNT
  20. SuperFlyTNT

    WANTED B/C console shifter delete plate

    Watch your mailbox for the pics ;-) Part #2656889 Regards, Wishnu
Back
Top