Search results for query: *

Scrolling through Facebook tonight I found this one posted up by the new owner. Initially it was bought for the engine but he changed his mind about the car based on its condition. Car came out of Ravenna, Kentucky.

Seen this pop up for sale locally on Facebook for $6000. Looks really solid from the pictures. Located in Hollywood, Maryland.

Saw this scrolling through Facebook this morning. Don’t know if it has been shared yet. Looks like there’s still some good parts left on it.

With an SPD date of 4-13, my 1971 Polara “Delmae” celebrates her 50th birthday today!

About time I get serious looking for parts for Delmae. I am searching for a pair of solid A pillars. Any 69-73 4 door sedan (xx41 car) will work, but wagons should work as well. I am located in Southern Maryland and will be at Carlisle in July as well. Also looking for lower right hand...

I guess the past year and a half of me SAYING I was going to start working on Delmae and the constant taunts and bullying of Wyatt and Nick on Facebook has finally gotten to me. IT HAS BEGUN!

So as many know, I have a small affinity for GA4 Mopars that stemmed from my own ownership of Delmae, a GA4 coded Polara. To give you an idea of how rare, here’s the total production percentage of C Bodies painted in 1971 (no GA4 C bodies in 1972) : - 1.8% of all Dodge Polaras and Monacos - 2.5%...

Anyone have a back story to this? Found it over on Instagram.

Been a while since I have worked on the car, and with Carlisle looming closer, it seemed like a good time to start preparing my rust free subframe to be put in Delmae. However, I do have some questions/concerns: Firstly, where can I buy Torsion-Quiet specific bushings? Looking at the frame...

Ever since leaving Carlisle, I have been on a constant buzz in finding a set of A-pillars for Delmae (1971 Polara 4 door sedan). Unfortunately most places I’ve contacted do not have them, however, a friend of mine Grant Hyler happens to have a few Fury parts cars that have solid A pillars and is...

You know that adage “too nice of things on too junk of cars”? Well this is that instance, and I apologize to all my friends who have seen my posts elsewhere on what I’m about to show. Back in February, I picked up a set of 15x8 Cop Rally wheels for Delmae using some of my 21st birthday money I...

As with any young and spry person of society, I spend a majority of my time on social media and gaining all my information from said outlets. I spotted this over on the Daily Mail about a cold case murder from 1970. What pulled me in wasn’t the murder, but in fact the photo of the car they used...

So I stumbled across this on Facebook earlier and now I am curious. The white Polara is the car in question with what looks like oversized bumper guards/bumperettes on it (I’m guessing to act as a push guard?). Never seen them before on any other Polara I could find (all I can find are the ones...

I feel like Delmae has already garnered a decent following base on here, however my posts have been few and far between on progress, which has made it a little messy for those trying to follow her entire story. So I have decided to move all my update posts into this thread here, word for word...

So it’s been another year (!!!) since I have made an update post on Delmae. Feel like it’s finally time to post what all has been done: From where we left off, I had purchased a rusted out gas tank for far too much, and had put a damper on my mood. Luckily, that has been temporary resolved...

During this idle time where I spend half my day in classes and my other half staring at a blank wall, I have begun to create a list of all remaining parts needed to finish my 1971 Polara sedan. Of course one of items is an exhaust system. I am leaning towards TTI 2.5 inch H pipe system, as I...

As many know, I run a page on Facebook with @71Polara383 called "1970-1971 Dodge Polaras and Monacos", and in doing so I scour many Facebook groups looking for previous and current owners and their cars. However, through this, I have discovered something that I doubt many know- the 1969-74...

Selling my 4bbl Cast Iron intake manifold from a 1977 400 big block. Casting no. 3830949. Spread-bore design made for factory Carter Thermoquad. Intake will need to be cleaned up before installed. Willing to ship anywhere for extra. Will also trade for vintage big block M/T valve covers.

Selling my C-Body driver side 440 exhaust manifold. Casting no. 2.43247 (2843247). Guy I bought it from thought it was a HP manifold, however the outlet diameter is 2.25 in and therefore is not. He also had painted it back in the late 90s and packed it away since then. I am willing to ship it...

For a while now I had been thinking about what to do about plates for my 1971 Polara. Whether to get historics or find 1971 plates for it. Well my answer came a few nights ago when I was in one of the sheds and found these: the original license plates to the car. Just something fun and cool that...