Search results for query: *

Looking for just one 15x6 road wheel trim ring like in pictures below. This is 1-3/4" deep. Please PM me if you have one you can spare and price. Thanks!

Guys, trust me, I've been doing my research, looking for OEM wheel sizes for my '69 300. My head is spinning from doing a 3 piece wheel build on my SL55. OMG! Anyway, that SL project is done. Now working on some wheels for the 300. I currently have 15x8 Magnums on there now. I picked up some...

Guys, I've been out of commission since October....ankle surgery. Anyway, Before my surgery, I had replaced my PS pump. Watched videos, researched on internet, etc on how to bleed the pump. I jacked front end up so front wheels off ground, turned wheel full left/right at least over a 100 times...

PS pump squealing like a pig when I get on the gas. Pulled the drive belt off while parked, no squealing. Pully moves up/down, side to side. Can the pully be spinning on the shaft or is my pump bad? Here are a couple pics of my pump. What type is this, (Federal/Saginaw)? Please advise what I...

So, all the parts starting to come in for the disc conversion. I got word today that the left caliper I ordered wont be shipping. Didn't exist from seller. Anyway…. Both the old OEM calipers have pistons I can't fully remove. Pistons come out maybe about a 1/2 inch. Can push pistons back in...

So...….got my spindles and disc setup from Barnfind...2 boxes. Issue with one of the boxes, surprise, surprise! Box kinda opened, and lost the baggy with some of the bolts. Questions...are the bolts anything special that hold the backing plates on to the spindles? Like low profile heads or...

Looking for my vert. Just need two...driver and passenger doors, the exterior ones. Can be new or used. Currently have nothing lol. Always thought there should be something there, and when reassembling my chrome, and door panels, realized I might be right...that I'm missing something. I see...

Going to do another project...drum to disc conversion on my '69 300. Currently reading the massive thread on the subject. Looks like 73 spindles may be the way to go? PM me if someone has spindles. Looks like that will be the hardest part to track down. May go for earlier style if I can source...

For my '69 300 with front drums. Want to replace the bleeder nipples, but need to know the size. Going to put in some 'speed bleeders'. Going to change out my rubber brake lines for some new ones. Old ones are cracked, making me nervous. Speed bleeders make life so much easier when bleeding the...

I'm currently looking for a OEM bumper jack for my 'vert...just for show, not to use. Anyways, I know on my old C5 convertible, it's recommended to open both doors, and jack both sides up evenly. To prevent any twisting. Is this true on Chrysler convertibles? Thanks!

This is passenger side mirror. Need to disassemble for chromers. How do I get these 2 pieces separated? I can't unscrew that ball. Is it pressed in during assembly? Thanks.

Looking for a RH mirror for the 300. Found a nice drivers side on ebay, cheaper than my chrome guy can do. Now need a passenger side. Let me know. Thanks!

I stumbled across a 1969 300 HT, green int/ext, (see only pic)...very close to me. Met with the owner today, super nice guy, had some good conversation. He bought the car for the drive train to put into a '68 Charger. Runs/drives, couple small tears in front seats, back seat in great shape...

This was the worse piece. Chrome guys advised against it. Part was too far gone they thought. But did say it would look better, but couldn't guarantee I would be happy. Picked part up today....I was happy! Chromers were impressed too! lol Not like we can just go on ebay and order up this trim...

Original plan was just to get my new HP manifolds welded up. Now that turned into getting new tips installed. Showed them pics of what I want. Will see what they can do. May get some series 40s installed. They have some used ones . Figured used is ok since there's no packing in them. Owner said...

So somewhere along the line of different owners, the wheel covers were lost. Here is a pic of the wheel covers that at some point were with the car. Which cover would of been stock, and which one would of been a upgrade? Also included the build sheet if that helps with what wheel covers came...

This is from my '69 300 vert. It's a clip that slides into the trim piece then attaches to body. Used to secure the piece that the convertible boot attaches to. Any ideas where I can find this type? Needs to be like this. The screws come in from the underside into this clip. Has to be like this...

You pay shipping. 10 bucks shipped. These are two, new, AC Delco 15590 belts. Rock Auto said they would fit my '69 440 with AC. They don't. I'm thinking they will fit a '69 440 with STOCK AC. I have aftermarket AC I'm in the middle of installing. Thought I measured correctly for new...

OK, getting tired of using my BT portable speaker, not very loud. I have the OEM radio, which I'm not going to touch, not going to cut dash, door panels etc for speakers. This is going in my '69 300 'vert. Taking measurements of rear center speaker location, I found a plastic cover for the OEM...

OK, finally replaced my rubber fuel lines with some hard lines. All good, except a leak where line goes into carb. Can tighten the line, but stills drips. Looks like the inlet part on the carb is scored, (see pic). Can this part be ordered somewhere, like Holley? Or can some type of sealing...