Search results for query: *

  1. Stormrider

    Anyone try these OER NP6157 "Federal clone" pumps yet?

    Thanks Saforwardlook I ended up returning Cardone pump to Classic Industries and purchased A BBB pump from Rock Auto for about the same price. Napa Auto was like a $100 bucks more (crazy).
  2. Stormrider

    Anyone try these OER NP6157 "Federal clone" pumps yet?

    From what google has to say and we know, not always accurate, Cardone and BBB like to sue each other so there is no relationship. Cardone does make a new pump part# 96-6184 and BBB INDUSTRIES #N7222103. OER appears to be a middle man with marketing NP6157 which can be found on many sites. On...
  3. Stormrider

    Anyone try these OER NP6157 "Federal clone" pumps yet?

    It looks new, they say its new and I got the one maker I try to avoid. Sounds like it will be ok if its BBB. Classic industries list it as OER pump and several others list the NP6157 with no manufacturer listed. Thanks for the response I was considering returning it.
  4. Stormrider

    Anyone try these OER NP6157 "Federal clone" pumps yet?

    I know this thread is old, FYI I ordered a NP6157 from classic industries and its a Cardone, not happy about that (see photo).
  5. Stormrider

    Oil Changes on older cars

    I have read that zinc additives do not always mix well, as I think Big John had mentioned, best to get it already in the oil. Diesel oil how much detergent is too much?
  6. Stormrider

    Oil Changes on older cars

    I found this article sometime back regarding this subject. Best Oil for Classic Cars Good read, I think most of this has already been said but still worth the read. FYI
  7. Stormrider

    ARP head bolts 12pt or Hex

    Thanks 77newyorker440 for your opinion, I thought this would be somewhat of a topic of interest. I read somewhere that with the 12pt bolts you can get to the bolts without removing the rockers but not sure if that applies to Edelbrock rpm heads on a 383. I have a set of eddy’s rpm 84cc from...
  8. Stormrider

    ARP head bolts 12pt or Hex

    Edelbrock Aluminum heads install 383, 12pt or Hex ARP bolts pro and cons ?
  9. Stormrider

    383 head gasket steel or comp

    Thanks for the help and education:thumbsup:
  10. Stormrider

    383 head gasket steel or comp

    Thanks guys, the pistons are down .005 -.012 from a dial indicator years ago one side better then the other. The cam is mild, has a longer duration Melling 23204 specs are above, the carb right now is a holley 510-80508 750cfm and the dead area on the heads is big see pics, if you consider the...
  11. Stormrider

    383 head gasket steel or comp

    Gentlemen, as a novice I am looking for advice, Trying to figure out which head gasket to use, the stock .020 steel or the .040 Fel Pro comp The pistons are TRW 2315f -30 and are .005 down, (that’s the closest one to the top) with stock 906 heads and a mild cam - INT. 0 TDC 34 ABC 214 32 BTC...
  12. Stormrider

    Steel Head Gasket

    that's a drilled hole in the stud
  13. Stormrider

    Steel Head Gasket

    65copcar its the last one on the pass side on the firewall #8 , drilled through but still not coming out, tried ez out and a screw driver , heat , wax.
  14. Stormrider

    Steel Head Gasket

    Thanks for the advice and heads up , Trace 300 Hurst
  15. Stormrider

    Steel Head Gasket

    sounds perfect, thank you
  16. Stormrider

    Steel Head Gasket

    Thanks, looking for the specs online for that part number, would you know the bore dia and thickness for that gasket? Ebay was a good call, there appears to some, helps to have the right part number.
  17. Stormrider

    Steel Head Gasket

    Well it looks like I have to pull one of my 906 heads off my 30 over 383 to fix a broken exhaust stud. I was looking for parts gaskets etc ... before I start so I have everything to go back together and was planning on steel shim head gaskets, hard to find right now and the reviews at Summit on...
  18. Stormrider

    What are you working on today??

    Whats the deal with Mopar Performance Steel Shim Head Gasket Set Item #: MOPP4286754 out of stock everywhere Working on fixing a broken exhaust stud that I barely touched and it snapped, looks like the head will have to come off and cannot find these gaskets in stock. Mr Gasket 1135 have some...
  19. Stormrider

    Help HP exhaust manifold and brake booster fit

    Thanks Dave, True the 9 inch booster I have was not designed to fit with the B body HP manifold, the clearance looks to be tighter, then that with the 8in B bodies, I think it will fit but not sure if it will have enough space with regards to heat from the manifold. I 'm looking to see if anyone...
  20. Stormrider

    Help HP exhaust manifold and brake booster fit

    Brake lines at the master will have to made I think.
Back
Top