Search results for query: *

  1. Anthony 71 Paisley

    WANTED 71 Fury Bucket seats

    I know this is a long shot. But I'm looking for bucket seats for my 71 Fury. I would prefer fair condition on frames and back but they will be recovered anyways to match my Paisley. Im not looking for low backs or with adjustable headrest . I'm located in Suffolk County NY Long Island so closer...
  2. Anthony 71 Paisley

    WANTED Bucket seats

    A few months back a guy on this site sold a pair of bucket seats , they were out of a 71 Fury. I was a day late , such is life. I'm looking for a pair , they don't have to be in great shape I'm hoping to have them recovered in the Paisley pattern to match my interior. I would prefer non power...
  3. Anthony 71 Paisley

    SOLD Crane Ductile Iron rockers

    Set of Crane rockers for Mopar big block. Comes with spare adjusters. I believe they are 1.5 ratio. Will ship on buyers dime , PayPal or cash only. Suffolk County NY . 350$
  4. Anthony 71 Paisley

    509 vs custom

    Good Morning all. My inexperience leads me to a question. I am in the middle of having 440 built for my 71. .060 over , stealth heads with bowl work ( still to be completed), 1.5 harland sharp , Icon 9953 pistons should put me right around 10.5 ish . Kinda loosely based off the LOWLY 440...
  5. Anthony 71 Paisley

    Leaf Spring isolator

    Good evening all. I'm still collecting parts for a leaf spring rebuild on my 71 Fury. I ordered the majority of the parts from General but I have a few questions The leaf spring isolator I'm looking for a lead on them . Also if I'm not looking at the parts book wrong , it looks to me like...
  6. Anthony 71 Paisley

    For Sale 1970-71 Fury 2 body moulding

    Please see Facebook link at bottom of page for better pics. I had some of these mouldings on my 71 Fury 3. They didnt fit quite right. They were NOS until I mounted the driver side. Passenger side has never been on a vehicle. Please see the ad, asking is 350$ will ship on buyers dime or...
  7. Anthony 71 Paisley

    Big block headers

    Making the conversion to Big Block 440 in my 71. Just collecting parts to make the swap this winter. Please correct me if I'm wrong TTI seems to be the only source for an RB . Schumacher I think would probably be my 1st pick but they seem to be out of stock on alot of their items (did they go...
  8. Anthony 71 Paisley

    SOLD 438 small block oil pan

    Oil pan for small block from 71 Fury. Stamped 438 . It's in good shape , has some flash rust that a few minutes with some WD40 and a scotch brite pad will take care of. Will ship at buyers expense . Located in Suffolk County NY. 35$ +shipping or local pickup
  9. Anthony 71 Paisley

    Newbie question

    My small block was built last yr with solid lifters. I just checked out the lash for the 1st time and noticed when bumping the motor over alot more oiling on passenger side as opposed to the driver side. If I remember correctly it's a Melling HV pump in a Milodon 7qt pan. Should I be...
  10. Anthony 71 Paisley

    WANTED 71 Fury parking light/blinker switch

    Good morning, I'm looking for a directional switch for a 71 Fury without tilt wheel. As well as a passenger side ( parking light ?) housing located under the head light.
  11. Anthony 71 Paisley

    For Sale Torque converter & Headers

    Hello all. Have some items I dont plan on using on my car. 727 Torque converter TCI 142222 rated to 4k . 325$ A stock 727 converter from my 1971 360 Fury 50$ Factory 2 bbl intake off my fury . 50$ Factory distributor 15$ Sanderson dd1 headers ( they dont fit my 71) 300$ Thanks for looking...
  12. Anthony 71 Paisley

    Neutral saftey switch

    Good morning all. I found a 46rh with a 3k convertor to put in my 71Fury. Got it for a song and a dance. I'm relatively close to starting it but the case connector is different both 3 pins the 727 has longer pins. Can I safely do a swaparoo with hurting the RH. I haven't put the PATC OD kit on...
  13. Anthony 71 Paisley

    Moulding retainer

    I found a set of Fury 3 moulding but I'm having a helluva time trying to find the correct retainer for body mouldings on my 71. The #s I was able to pull from the originals that were shipped to me ( my car came naked with no mouldings or clips) was 4548 but I cant find them anywhere . I'm not...
  14. Anthony 71 Paisley

    OD for 71 Fury

    This winter I would like to do a rear gear swap and OD tranny. My 727 leaks like the titanic and it needs steeper gears (currently 2.71) . I would like to do 3.90 or 4.11 with the OD swap. I haven't found any rh42 or 46 around on Craigslist or Junkyards but plenty of GM200r4 and 700r4 (and...
  15. Anthony 71 Paisley

    Reading plugs

    Good morning all, just curious how long you should run a plug before you try and get some information on whether it's burning lean or hot fouling Etc. I see some people say they take it for a 2-mile ride up the road pull the plugs and make adjustments. Is that enough time? Should it be 50 miles...
  16. Anthony 71 Paisley

    8.25 carrier question

    I want to put some higher gears in my 8.25 . It's a 71 Fury warmed over 360. It currently has 2.??? Something gears . Desert gears . I would like to do the overdrive thing but that's another topic. Is there any carrier change with the gear change or will the carrier I have accept the sure...
  17. Anthony 71 Paisley

    Wiped cam on break-in

    Had a reputable shop put together a 360 for me ( I was impatient). They talked me out of the roller cam . I have heard nothing but horror stories from people putting in flat tappet cams and wiping them out. Now I'm a statistic. They assembled intake to pan , installed the distributor and...
  18. Anthony 71 Paisley

    Underhood pics

    Can anyone share some underhood pics of their 360 with AC ? Specifically the bracket placement for accesories. I'm putting back together a 71 Gran Coupe that I received in boxes . It's a pain to sort out without a starting point to go off of. I'm going off of bad internet pics and witness...
  19. Anthony 71 Paisley

    Newbie small block question

    I was impatient and had a shop build my engine. Hopefully to accept delivery this Thursday ( fingers crossed). He sent me a pic of the assembled engine and I'm curious about so much intake gasket showing. It's a reputable shop , should I worry or ask anything before I pick it up?. Its a...
  20. Anthony 71 Paisley

    Window gasket Fury

    I started trying to get my windshield trim mounted on my 71 Fury. It looks to me like there should be a gasket underneath the trim between the stainless and the windshield. Maybe I'm wrong . I cant find any info on where to purchase a gasket if there is in fact supposed to be one... What about...
Back
Top