Search results for query: *

I’m looking to put the Lokar throttle and transmission kick down cables in. Anyone have experience with them and know what part numbers I need. 68 newport with a 440 and 727. Thanks.

I have a 1968 Newport I have another thread going about a 5 speed conversion as well. Dose anyone know is there a rack and pinion conversion with out doing the insane magnaforce set up.

I have a 1968 Newport and am thinking of switching to a 5spd transmission. Dose anyone know of a conversion kit for the c body. I know silver sports but they don’t have a set up for c bodies. Any help would be great. Thanks

Hey guys needs some help I have a 1968 Chrysler Newport and I did the willwood disc brake conversion 140-15196 I was told everything would work the way it should but my brakes will not pump up it just dribbles out and applies small amount of pressure to the front rotors I was thinking I need a...

Hey guys is there an aftermarket axel that will fit 8-3/4 rear on a 68 Newport. Something stronger then stock???

Hey guys I’m looking to trade or sell my dual 500cfm edlebrok set up with performer intake it’s on a 440. for a single 850 holley with intake. The work fine there on my motor now so can demo that they work fine.located in port Jefferson new york

I have a 68 Newport with a 440 .030 over 440 source heads crane rockers and cam. I had the motor redone in April and I herd a lifter tick. When I pulled the valley pan I noticed my cam was not riding on the center of the lobes and you can move the cam over a 1/4 inch front to back. Dose anyone...

Hey guys I’m replacing my cam in my 68 Newport and would like to know what is the biggest cam you can fit with flat top pistons?? specs are 440 stock bottom end .30 over with 440 source aluminum heads 2.14 intake 1.810 exhaust 3/8th pushrods with hydraulic flat tappet lifters 471 lift as of...

Has anyone had an issue with 440 source stealth heads and seeing aluminum shavings In the on break in. Maybe 40 miles on rebuild and new stealth heads and I found aluminum shavings. The engine builder tried to tell me it was from where the bottom of the valve springs sits there just wearing in...

Has anyone had an issue with 440 source stealth heads and seeing aluminum shavings In the on break in. Maybe 40 miles on rebuild and new stealth heads and I found aluminum shavings. The engine builder tried to tell me it was from where the bottom of the valve springs sits there just wearing in...

Hey guys my 68 Newport 440 overheats at idle it just creeps up I have a 26 ac radiator in it the motor was just rebuilt it aluminum heads rollers all that. Since I got the car last summer it’s been doing this I put some electric fans on it that didn’t help granted they where garbage they really...

I wanna put 17-18 inch rims on my 68 Newport cans you guys tell me what is the biggest I can go front and rear. I don’t know what backspacing I need or anything. Thanks

I just had my motor rebuilt it’s a 440 and it has some smoke coming out the breathers not a lot but you can see it. I know that there’s supposed to be a pcv valve on it I think but I don’t have one. Is this just crankcase pressure??? Any help would be great thanks.

Hey guys I have a set of 915 heads I just took off my car they have a valve job 2.14 intake 1.810 exhaust valve with comp springs and stainless valves. The have around 6000 miles on them I was wondering what I could get for them. The one problem and it’s a big problem is the driver head is...

Please lmk if you have any headers I need them kinda fast. Thanks

Hey guys please lmk if you have any headers for a 1968 Newport co Deion is t that big of a deal thank the

Hey guys I have a 1967 440 with 915 heads full comp valve train and cam there 1.6 roller rockers with hydraulic flat tappet lifters and I lost some compression in a couple cylinders. So I did a leak down test and heard air coming from the valve train area so I thought maybe my rockers where out...

Hey guys what’s up I just moved near reading pa and need helping finding a good mechanic I have a 68 Newport with a worked 440 and it’s starting to lose compression on 3 cylinders. So I need a price on a rebuild.

I have a 1968 Newport 4door with a 440 Location: Robesonia. Pa