Search results for query: *

1967 Chrysler Newport Custom, 383 727 auto 8¾ car with 55,146 original miles. All numbers matching drivetrain. Ohio car with very little rust, factory undercoating, floors and trunk pan are very solid. I've touched just about everything in the car. Motor has absolutely no blowby, rebuilt trans...

I'm completely at a loss here, I have a 67 newport with a 383, I drove it all weekend and it ran great, never had an issue. Monday morning I start it up to drive it and it sounds like I have a massive exhaust leak, and it smells like raw fuel. It cranks over and starts normal and idles fine, I...

I have a 67 Chrysler Newport, I recently replaced the alternator with an OEM 55 amp alternator, and voltage regulator but it's only reading 11 volts. I've checked all my grounds, and I don't appear to have any parasitic draws on the battery. It slowly gets weaker and after about a week of being...

Somebody HELP ME. I have a 383 2 barrel, I recently converted to a 4 barrel, I have a freshly rebuilt edelbrock 1406, it's a 600 cfm 4 barrel with electric choke, I have everything hooked up properly, no leaks or open ports, I've sprayed brake clean around the intake/carb base and there was no...

I've been planning to swap to a manual for awhile, has anyone ever swapped an A833 4 speed into their 1967 Chrysler C body, that came with a 727? Can the stock automatic crossmember be modified to work? Can aftermarket B body crossmember work in a C body?

My gear selector will not go into drive, it will go into reverse and neutral, but if I pull it into drive it just goes back into neutral. I just rebuilt my transmission, the valve body worked properly when I tore the the transmission apart, I did NOT mess with the valve body when I rebuilt the...

My transmission went out about a month ago with 214 miles on it, pan was full of metal and I'm thinking it's the front pump. The car still moved but the pump made a lot of noise especially in reverse. I have another pump and I'm wondering if there's a easy way to swap pumps without tearing down...

My 727 has been acting up, it worked fine all day then all of the sudden it dropped reverse and all forward gears, after being turned off for 5 minutes it started moving under it's own power for about a quarter mile then stopped again. The fluid is new, the level is good, no leaks, throttle...

*it was in fact the ammeter, I have bypassed it temporarily and will be wiring in a new set of gauges than you for the helpful tips* I have a 1967 Chrysler Newport Custom, and it has no power past the dash. I've gone through all my grounds, all my connections, and fuses, I've put a test light on...

I own a 1967 Chrysler Newport Custom. It's a completely original 383 automatic, 2 owner car. It's a project car that me and my dad have been slowly working on over the past 18 months. Location: Lima, Ohio