Search results for query: *

Looking for roller rockers. Was wondering which one I could get without doing any grinding on stock iron heads? if changing them do you have to change the push rods to longer or shorter?

Does 1967 Plymouth belvedere with a 440 headers fit on a 1968 dodge Polara with a 383?

When you driving straight rearend make no noise until you turn! Then it makes a clunking noise! It does have the sure grip in it.

Does anyone know how to read the build sheet! I have mine but don’t know all the codes.

Is this rotor good a good replacement for the ones that are on there way out?

Looking to upgrade the converter! I have a stock one in now but need a 2500 to 3000 stall! Looking at ones online for at ones for a tf727 some have the flywheel attached and some they don’t! Mine is converter and flywheel together. What’s the diff between the two?

I think my motor is going? Oil pressure at idle is 25lbs driving is 40lbs! Then if it’s idling when I put it in gear it drops below 10lbs!

When driving car runs around 180degrees but after getting to where your going and shut the car off it percolates out the overflow tube onto the ground. How to fix this problem?

Master cylinder is leaking out the top by the gasket! What’s the best fix a new master cylinder or try to find a new lid and gasket? I looked for a new seal but can’t find one!

I’m looking to upgrade original front disc brake to willwood or something similar! I don’t see nothing that comes up unless you have drum spindles! Looking for help

Ok installed a new avs2 awhile back. I have got around to driving it cause if working hrs. Car idles great but as soon as you put it in gear it’s stalls! I heard that it could be dumbing to much fuel! I put on a fuel pressure gauge and its a stock pump and it’s reading 11 to 12lbs and they...

Has anyone did any kind of upgrades! I want to leave the stock one in place but hook up a a new one with speaker and amps. Maybe put the new head unit in glove box or in my console so I don’t touch the stock dash!

I have one on the passenger side and one on the driverside that’s leaking! I redone the driverside with the stuff in the with bottle. What is the best stuff to use?

Finally finished it over the axle and out the backhttps://youtube.com/shorts/Qu8XvRKB9gk?feature=share

Looking for better HP gaskets! The ones i have look like the remflex ones they don’t cove the manifold completely.

Took a lil bit but she running!

Hooking up the electric choke where is the best spot to hook up the pos+ side to?

Has anyone used these head gasket before?

Looking for aluminum heads with straight spark plug so I can use stock HP manifolds!!

I had a starter plate but I think cleaning up I tossed it! Do you need it or no? It looked something like this one!