Search results for query: *

  1. 67-Fury

    Transmission Fluid

    How many quarts per just a filter change. 5?
  2. 67-Fury

    /6 Engine mounts

    I could be wrong. But I just don't think They make a Slant 6 motor mount for a C body. The demand is non existent.
  3. 67-Fury

    /6 Engine mounts

    I thought that to but I'm clueless on this one.
  4. 67-Fury

    /6 Engine mounts

    I'm not a huge fan of the new layout to be honest but I still need to harness the collective brain trust intellect. I know there aren't as many as a V8, but the C body's that came factory with a Slanty. Are those C body specific mounts? Or just your run of the mill slant 6 motor mounts?
  5. 67-Fury

    727 dipstick tube leak

    So much intense, technical discussion over a rubber ring. That's the level of detail I like... I am doing this for the first time. I ordered a new o ring. Not 100% sure that was where my leak was coming from but after removing the tube, I found evidence of rtv around the o ring and bottom of...
  6. 67-Fury

    Trans Line Size

    Get a new set from inline tube. They make accurate, well made lines.
  7. 67-Fury

    727 Pan

    Hmm i like that idea. I see some deeper pans you have to use a Filter spacer because of the depth of the deeper pan. Would i have to do that with one of these?
  8. 67-Fury

    727 Pan

    Hmm i just mite try that then i got a Ball peen hammer and a Big anvil. My pan isn't to badly warped. I am all for fixing stuff. I don't want some repoped garbage and i certainly don't want to spend tons on a Fancy deep sump pan. I am Not making a race car.
  9. 67-Fury

    727 Pan

    Where can i get a good 727 fluid pan replacement? My stock one is a bit warped. I really don't want a deep sump pan. Stock depth will be fine. I just want a quality piece. Internet is littered with them but i don't know what's good and what's junk.
  10. 67-Fury

    67 Fury II Wagon Gas tank

    Here is a Option.
  11. 67-Fury

    Thermoquad kickdown with lokar cable

    Here is a good video on the cable install but with a edelbrock.
  12. 67-Fury

    B&M ratchet shifter in 68 Fury III?

    The piece that bolts to the frame rail. I found everything else.
  13. 67-Fury

    B&M ratchet shifter in 68 Fury III?

    Do you have any pictures of what you have?
  14. 67-Fury

    B&M ratchet shifter in 68 Fury III?

    As long as the kit says it ls for a 727, it should work for you. If you get rid of your stock column shift, I could use a few pieces. I was going to go a Aftermarket shifter route but i can't bring myself to drill a bunch of holes in my perfect Trans tunnel. I had a, I Saw the light kinda moment...
  15. 67-Fury

    Dana 60

    Ford 8.8s are C cliped as well and they are popular putting them in Abodys. Don't think i have the heart to do that to my car.
  16. 67-Fury

    Dana 60

    I think i Read in a Mopar Mag that 9 1/4 Axles have 90% of the strength of a Dana 60 Axle. But they use C-Clips to hold them in. I think it would be easier and a lot cheaper to find a Cbody 8 3/4.
  17. 67-Fury

    advice on a sure grip

    Grow a pair & Run a Spool. Don't worry, You will regret it.
  18. 67-Fury

    Freeze Plugs

    While i have the engine out that will go in my car, I Think i will replace all the Freeze plugs with Brass ones. The one plug has some House expansion foam around it because it leaked.(I thought that stuff was just for Fixing Quarter panels :rolleyes:) My question is should i just pound them...
  19. 67-Fury

    z bar - 68 fury III - alternatives, pictures, dimensions

    That would be a Fantastic Read but Don't put it off for too long. Every year more & more of these cars get Crushed, Derbyed, Parted out or "Donked" and we all know This Generation Holds Zero interest in anything that isnt made by Apple. The time to write it is now While they are still around...
Back
Top