Search results for query: *

Beautiful! Since my earlier post, I have found a set of 7" and 8,5" and they are on my 69 Satellite

Long time no seen. Had TC inspected for 2 years at july. Have not driven much, maybe one tank of gas. I was cleaning my garage and found ingition box that I converted for HEI module. Just for giggles, I changed it to TC. Bypassed ballast resistor, I already had a Bosch coil that can use direct...

I have forgotten that swap for now, sold magnum engine. For transmission with magnum, I had A500 overdrive automatic. That with 3,91 gears would probably have been good combination for less torque. 440 in the car needs overhauling in some point. It uses oil about quart per 500 miles. At this...

My Satellite is F3, looks same?

Thanks Steve :) This still has about 80% original worn paint left, so it is not perfect. But it is perfect driver, no need to worry about rock dings and so on. This will not see that much miles this summer, since I got my Sport Satellite done for this summer.

First real towing to local show

Nothing much new here, only couple trips for this summer so far. But I installed a trailer hitch. I started with Mercedes W124 removable hitch. Had to shorten it a couple inch, made brackets under bumper bolts and made new section to frame rails near rear axle. Factory gives 7000lbs towing...

Where did you get new atc servo?

Now I had radio to play rock'n'roll, summer vacation and a few days of my own time. It was road trip time! I had no exact plans so I left to roads that were not that familiar. It was in the middle of week, so no really anything happenings anywhere. So I searced my facebook (Mopar)friends and...

Looks like driving season is over for this year, 2135 miles this year. First job at spring was gas gauge which did not work. I added extra ground to sending unit, checked sending unit that it works ok, still no movement at gauge. I tried to find voltage regulator under dash, what a thight...

:thankyou: I need to update my project story here, I have been lazy updating it.

Ok. That one is imported in 2012-13, few years before I bought mine. Good to see it is back on roads :)

Here are the 3 T&C in Finland that I know. The green one has been parted in late 90s, I have some parts in my car from that

Cool! Got any pictures of it? Is it already registered?

´ My T&C, another brown in southern Finland and? The green one that was imported in 80s and has been parted out in late 90s?

Passenger side woodgrain is done for now. I found this double relay from passenger kickpanel. What is this for? I cant seem to find it from wiring diagrams. Rusted through and broken connectors. Installed a better 5th door handle too. Old one was badly pitted, shaft stuck and housing...

That could be correct, thanks for tip :) Only need about billion those, for two trims per side :D

I am afraid to remove trims and there is the exact reason. Do you have part number for clips?

These have been about $25 each. Not cheap either, but nothing else worked... I don't think I am ready for that amount of work with vent window gaskets. I have access to small 3d printer, but who would make programming. Sport Satellite rocker moulding clips are not available, so I took one to...

Not at this moment. I still have 318 magnum and A500, but I am going to use that transmission for my 69 Sport Satellite that I am working now. 440 stays in for now. Passenger side woodgrain is almost gone. I have used 2 sticker removing wheel now, had to order one more.