Search results for query: *

  1. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Is this a racing thing or everyday use? Never heard on that.
  2. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Back in the day I don't remember tire shops pushing 4 wheel alignments at all so thrust angle was not checked or talked about to my knowledge.I used to take care of the maintenance for a small fleet of about 20 trucks and vans. Never discussed and if you rotate tires every other oil change how...
  3. Mr onetwo

    Tech tip: How to align ur own suspension at home

    I'm going to try it just like in the video...string and jack stands, then confirmed with the plates. He does say that you may have to tweek it a bit after you drive it.If I wasn't retired I would not have time to do this probably.
  4. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Please elaborate Mike. I spent a couple of hours contacting shops in my area and not one wanted to touch my car.The nearest shop that sounded competent is over 2 hours away, so trying this out makes sense to me.Other than caster,camber and toe what else is critical to a 53 year old cruiser like...
  5. Mr onetwo

    Tech tip: How to align ur own suspension at home

    I am so impressed I bought the tools and will try this out. :steering: Longacre Racing Products 52-78260 Longacre Caster Camber Gauges | Summit Racing Longacre Racing Products 52-79501 Longacre Toe-In Plates | Summit Racing
  6. Mr onetwo

    Tech tip: How to align ur own suspension at home

    Chris Birdsong posted this fantastic video on DIY front end alignments for Mopars...best I have seen
  7. Mr onetwo

    Drums to Disc...Today's Pricing

    I can confirm that the Raybestos pistons are steel and weigh a sh*t ton:thumbsup:
  8. Mr onetwo

    Drums to Disc...Today's Pricing

    picked up one of these cheap knockoff valves....we'll see if it works Mopar Disc Brake Proportioning Valve & Metering Valve for Disc Drum A,B,C and E | eBay
  9. Mr onetwo

    Caliper beyond repair?

    fill in these parameters on car-part....lots all over the place
  10. Mr onetwo

    Drums to Disc...Today's Pricing

    At least...that's if you can even find one.
  11. Mr onetwo

    Drums to Disc...Today's Pricing

    Did you use new pistons also? If so...Carlson or Raybestos?
  12. Mr onetwo

    Drums to Disc...Today's Pricing

    Manual brake car...hence the 1976 Volare MC
  13. Mr onetwo

    Drums to Disc...Today's Pricing

    Good morning all, I am gathering all the parts necessary to put manual disc brakes on my 1970 Fury III equipped with manual drums.I found a good set of complete 1970 Monaco spindles with ball joints,dust shields ect. from a junkyard in Maryland for $182 inc shipping and a pair of really...
  14. Mr onetwo

    disc brake conversion....stock or aftermarket?

    You are going to find that the 1973 pin type calipers are not available anywhere and haven't been for what seems like a couple of years
  15. Mr onetwo

    Lifting a Convertible

    It does...it is the single best tool I have ever purchased!
  16. Mr onetwo

    Lifting a Convertible

    I have a 2 post lift and I've picked my Fury a couple of times....rock solid.No change in the door gaps at all.I put the pads right where the FSM says to and yes I have safety stands for both ends.
  17. Mr onetwo

    A Poor Man's Master Cylinder Upgrade

    lots of good info here Technical Help Page - Mark Williams Enterprises, Inc and here DISC-O-TECH: Stop on a dime this mc works well for manual discs...15/16 bore from a 1992 Dakota. You would need a 2 bolt adapter plate... RAYBESTOS MC390188
  18. Mr onetwo

    Firm Feel Rebuilt Steering Gear on 1970 Fury 440/727

    It's an older MaxJax from when Danmar made them.Single best tool I have ever bought.It moves out of the way when you don't need it.I think Bendpak makes it now...very expensive.If you run into a used one for sale grab it.Epoxy anchors in a 6" slab.If you are curious there is a Maxjax thread over...
  19. Mr onetwo

    Firm Feel Rebuilt Steering Gear on 1970 Fury 440/727

    Thanks for doing a very complete and informative write up. This is on my list of to do's someday:rolleyes:
Back
Top