Search results for query: *

I'll send you a message in the private message section.

I do reproduce orginal clips, but need 2 or 4 orginal clips in very good shape to make a mold. I have never had a request for this particular clip so there may be a universal clip that will work. I have found if there is a universal clip which will work, you can find it at Mr Gs Mr. G's...

I have a great local power coat company and reasonably priced. I never knew there was a clear power coat.

I still need to see the clip but it sounds like I could replicate it. Sounds like @FURYGT might have a good one. Then I can make a mold of it and replicated. I have one problem the materials I used to make the end product are not available currently. One of the raw products used in making their...

Let figure something out, I will send you a PM or email. There is a new wrinkle however, that I just discovered this week.

Bill it sounds like you know this clip well, would you think it might be a clip to replicate? Is it basically a plastic clip with a steel shaft.

There are so many clips out there, if you have a picture with a ruler that will help. I would check out this place and he might have a unverisal clip that might work if he doesn't have an original. Mr. G's Enterprises - Home Page

If you are talking about the lower clips I make those and there are universal clips that work OK. If you are taking upper clips I make those too, there is nothing but the original design that will work. I am the only person who makes them. PM me Mike

I think that is an after and after. :poke: Nice, glad someone is willing to take on the task.

If you find out you can't get it back together, I would take pictures and see if you can get a chrome guy to repair it and then re-chome both sides. Do them both at the same time because they might not do the second set. My chrome guy said not to refer anyone to him, not interested in doing...

They are riveted from the factory. If you remove it from the car you might be able to rivet it back together if not broken. JB weld won't hold it together. FYI you need to basically remove the bumper to remove the whole tailight assembly, which is the only way to attempt the repair. I...

Are they actually available? I had my boot made of the material I used for the interior. On my 66 300, the boot matches the interior, not the top.

You need to do it that would look awesome. I have tried to picture the black canvas myself. I have liked canvas on every car I have seen it on. By the way, I have a friend who has a 89 Rolls-Royce with a red leather convertible top, good God how much would that cost to replace???

Good luck, I will be watching your thread. I hope you change my mind, and I take this job on myself too.

Also just because a guy has installed 100 Corvette tops doesn't mean he has a clue with installing something as big as our c-body tops. If you have it done professionally, still get referrals and I personally would never have a guy touch ny car without seeing a job they have done up close and...

I think I will have to agree to a professional. You need to really cut the grime and the only way you can do that as with a rotating buffer not one of these vibrating sponge things. If you don't know what you're doing you can make a huge mess. I bet you would be very impressed with what a...

Here you go. Looking for these wiring clips I have never figured out the search engine here. I did a general search nothing, a added my name because I remember commenting on it and it popped right up.

If they have a push pin, mount them to the body, and then use your hands or even a rubber mallet to install the trim. If they have a threaded shaft then those are meant to be installed on the trim first.

Great news, I remembered hunting for the screws but not the well nuts, so I figured it wasn't a big deal to find. For once there is a replacement item you can buy off the shelf, unfortunately I know you will need to track down some original screws to replace those which you can't use. I...

Hopefully it is 6-32 I see plenty of them offered, I have not seen a #4