Search results for query: *

  1. Zymurgy

    Found 1965 Newport or Other Floor Mats

    I don't want to discourage you from doing this, but part of my reason not to proceed was I wasn't able to restore the metal portion to a level I was happy with. It is embedded into the plastic so I couldn't work on it properly while it was still attached.
  2. Zymurgy

    Found 1965 Newport or Other Floor Mats

    I should clarify I totally baled on utilizing the rectangle section completely. I had originally planned on having custom carpet mats made and then inserting them in the mats. Also you are correct they were only located on the front seats. Something to keep in mind the plastic surrounding the...
  3. Zymurgy

    Found 1965 Newport or Other Floor Mats

    I thought about it but never ended up going that route and had custom coco mats made.
  4. Zymurgy

    WANTED 1966 Chrysler 300 Windshield Washer Bottle

    Someone here might have a used one but you won't find a new one cheaper.
  5. Zymurgy

    WANTED 1970 Chrysler trim mounts and wheel arches

    I made a mold of these or one very similar and there was way too much flex with the material I used. I can't remember why I didn't try a harder product. Are there any delicate features of the clip? I am not home for the weekend, so I can't check myself. I am editing and adding to the post. I...
  6. Zymurgy

    WANTED trim clips

    That is great even better finding a local source. Share what you used, so others might benefit from your solution.
  7. Zymurgy

    WANTED trim clips

    I agree, when I see a clip for the first time like this one, it usually means that there is a universal one which will work. It could be a totally different style. Seems like there were wire clips which might work in this area.
  8. Zymurgy

    WANTED trim clips

    Unfortunately I have tried to make something of a similar size, the urethane resin I use doesn't do well with that type of clip. I have gone up the shore hardness scale with a different product but then it is brittle. I would try Mr Gs Mr. G's Enterprises - Home Page
  9. Zymurgy

    WANTED Chlipse Chrysler 300 4 Door Hardtop 65

    I am way behind on everything right now, but send me a PM here and we can go for there.
  10. Zymurgy

    WANTED 65 300

    Sorry only make them for the 66 300.
  11. Zymurgy

    WANTED Tail lamp lenses for '70 Fury III

    Yes I had the conversation maybe a couple of years ago in another thread. Too big to fit in my pressure pot. Good luck.
  12. Zymurgy

    WANTED Tail lamp lenses for '70 Fury III

    I think we have talked about this lense before. Is the red part of lens, one whole piece? I am pretty certain it is too long to make a reproduction in my pressure pot
  13. Zymurgy

    WANTED Seals or material and screws or screw size 300 taillight

    I don't have anything off the car to tell you the proper screws, but if you have the original gaskets I agree with big John with having them reproduced by Detroit Muscle. If no one here on the site can help you, I would call Murray Park he could send you all the mounting hardware and I would...
  14. Zymurgy

    SOLD 1966 Chrysler 300 left tail light bezel and lens

    You're welcome, yes that bezel is probably the hardest thing to come by as any other c-body part. You just never see them unless they are damaged. If you find the right guy to re-chrome them he could do the repair. I would recommend my guy, but he said not to recommend him to anyone. They...
  15. Zymurgy

    SOLD 1966 Chrysler 300 left tail light bezel and lens

    Yes I t was me. Here is my journey if you are interested. My lens making thread.
  16. Zymurgy

    WANTED Power brake booster needed asap!!!

    @detmatt might be able to help.
  17. Zymurgy

    WANTED 68 polara wagon

    I would try Rock Auto, you will be able to see the current products available and reference. These are available at many sources here in the USA. I would trust them 100%, if they say they they will fit your wagon. Someone will correct me if I am wrong, but I can not imagine they are...
  18. Zymurgy

    WANTED 66 300 coupe drivers door.

    See if someone else chimes in, but I see you are from New Zealand. I know Murray Park ships all over the world and is a very reputable cbody guy. Murray B. Park - Used and NOS Parts for Chrysler, Imperial, Dodge, Desoto, and Plymouth
  19. Zymurgy

    WANTED Source for lower trim clips? 1966 Newport/Windsor

    Mike that is a cool Excel spread sheet, I am guessing you made that up for your own car. Just in case you got it from an outside source, I would love to have it for other models and years.
  20. Zymurgy

    WANTED Source for lower trim clips? 1966 Newport/Windsor

    I wonder if that could be made out of resin? I have urethane resins with different hardness. The stiffer resins could mimic the stiffness and slight flex of the metal. Do you have a straight on shot of the 6002123 clip?
Back
Top