Search results for query: *

  1. david hill

    Engine Harness Rework

    @theelectricaldepot.com is an excellent source for Packard 440 and Packard 56 electrical connectors and terminals for what you are doing.
  2. david hill

    Solid state meltdown

    Here are some photos of the finished appearance for comparison w/ matt clear finish.
  3. david hill

    Solid state meltdown

    Here's what i've done with the heater boxs that I have refurbished. Stay away from razor blades to scrape the surface, just get a good spray degreaser and a soft brush and scrub that heater box down real well. And most of the dirt and grunge will come right off. secondly when you refinish, it...
  4. david hill

    Wiring… Why can’t they just make a reproduction harness

    Go to this website The Electrical Depot. They keep in stock Packard 440 wire terminals both male and female for most of our Mopar needs they also stock common electrical plastic connectors commonly used on C bodies. For bulkhead connections and connectors you will probably have to use eBay as a...
  5. david hill

    anyone rebuild a 4 gang window switch?

    Devinism is by far the way to go. I have used him in the past and his quality is by far the best of any Rebuilder and of the same quality like purchasing new.
  6. david hill

    anyone rebuild a 4 gang window switch?

    ,@Devinism is who I use for pwr window switches as well for light and dimmer switches. Excellent turn around time.
  7. david hill

    LED dash lights

    Your seconf picture is what I used as a replacement they're available for super bright lights and are very reasonable and price
  8. david hill

    Fender Turn Signal Indicator Removal?

    Go to Harbour Freight and buy the 5 pcs trim removal tool set. Cheap, but very effective. Don't use a screwdriver it will dent your trim.
  9. david hill

    Fender Turn Signal Indicator Removal?

    Remove the stainless trim from the fender w/ the screw removed in the following steps. First apply masking tape to the fender on both sides of the trim to avoid scratching the paint. Next w/ your trim removal tool carefully pop the trim off the fender starting at the rear and moving forward...
  10. david hill

    All power windows suddenly not working.

    Check the main driver's door wiring harness if the circuit checks out to be good. A common failure point given the symptoms mentioned in you post. Broken 12-volt supply and ground wires are pretty common well worth checking into.
  11. david hill

    Dimmer switch for 70 imperial with automatic light system

    I agree it's a very hard switch to find. You might contact devilizm here on FCBO and see he has one.
  12. david hill

    Wiring Harness connector straps.

    These are sold by Dodge Boy on E-Bay. I have them on my 69 300.
  13. david hill

    69 Chrysler 300 Turn Signal Flasher

    If you have replaced your flasher check your grounds at the sockets in the rear and the ground wires at the front turn signal assemblies. Next check all your connections for corrosion, don't forget your firewall connection as its problematic.
  14. david hill

    Exterior LED lighting upgrade

    Removing the ignition lock cyl wil give you more leverage.
  15. david hill

    Exterior LED lighting upgrade

    Type in the info as in the my post in the E-Bay search. Light housings vendor name is Starklights , upgraded 6000K vendor is 6sports. View attachment 407230
  16. david hill

    Instrument panel lights

    No. You look up under the dash pad you should see light bezel. Drop the steering column down for ease of removal. Remove all the screws and position, the vent and map light assemblies out of the way. Carefully and gently pull down the upper bezel and disconnect the instrument light connection...
  17. david hill

    Instrument panel lights

    It's just the 2 bulbs.
  18. david hill

    Instrument panel lights

    Here is a pic of the results of the above post 10.
  19. david hill

    Instrument panel lights

    I have a 69 300 and this is what I did. Remove your upper dash fascia. Your dash fascia is illuminated w/ 2 bulbs. To get maximum performance drill out the rivets that hold the dash lite housing. Next remove the lenses. Spray paint the reflective inside w/ bright silver paint. Next replace the...
  20. david hill

    1970 headlight switch replacement

    Yes it is made by OTC.
Back
Top