Search results for query: *

  1. mdh157

    Topping off gear oil in manual trans

    thank you guys.......
  2. mdh157

    Topping off gear oil in manual trans

    Is anyone aware of an available tool that is used to fill the manual trans that is portable? A pump for use on a 5 gall bucket is more than is needed, this is only to top off a slow leaking trans 2 times a year.
  3. mdh157

    Special Order 6 Cylinder

    does anyone know what the special order 6 cylinder, VIN code C, made from 66-69 is or if the specs are any different from a regular slant 6?
  4. mdh157

    1968 Plymouth fury won't run right!! Help!!

    well, you could swap back to points/condenser if you still have them sitting around to rule out the pertronix.........but my $$ says the answer is in this sentence: "I did a test, and found out my distributor vacuum advance was blown. long story short I swapped that out, and the car ran...
  5. mdh157

    What engine is this? Need to pick some brains.

    what year motorhome? My f-in-law had a '72 and it had a 413 in it.
  6. mdh157

    Which carb rebuild kit to buy?

    Hey, I'm not officiallly back yet but I wanted to update this thread: I finally got around to fixing the carb issue after trying several different things. Ended up replacing the 4160 with the Eddy 1407 after discussing it further with Will. Bought the carb, elec choke kit, linkage adapter and...
  7. mdh157

    so what happened to my post from yesterday?

    they were lost for a bit longer than that, i made a few on friday that are gone
  8. mdh157

    Which carb rebuild kit to buy?

    Well I need to make a decision quick or it'll be no car @ the show
  9. mdh157

    Which carb rebuild kit to buy?

    got something that i can use the orig choke thermo on?
  10. mdh157

    Which carb rebuild kit to buy?

    I might just repl it.......but i want a vac choke and vac secondaries on a 750 cfm carb........as close as possible to bolt on and go
  11. mdh157

    Which carb rebuild kit to buy?

    Can anyone tell me how to find out the part # for my Holley carb Model 4160 that is the stock carb on my Polara? I expect to be getting a rebuild kit but they have several available for this model of carb. The front of the air horn has "List-6160" on it and 1801 right below that. i am going...
  12. mdh157

    fuel tank removal

    Bingo.........I am working on the GP, Polara tank is just fine, as a matter-of-fact I had her out today. sending unit or attached wire is bad on the Poncho, only way to fix either is by dropping the tank.
  13. mdh157

    fuel tank removal

    66: It appears to be too tight to get cutters in on the front bolts, the rear I can get them on the bolt head. Don't ask me how the hell they expect the rear bolts to be secured, cannot get a nut in there on top to thread the new bolts into, might be better off just trying to drop the front...
  14. mdh157

    fuel tank removal

    I thought abt getting new straps, do not want to have to wait for something i order then hope it fits correctly. My patience is waning again, another friggin project that should be simple but might end up getting nixed.
  15. mdh157

    fuel tank removal

    Can anyone give me a way to remove fuel tank strap bolts that are stripped without having to use a torch? Both front and back ones spin but won't loosen, several days of spraying liq wrench hasn't solved the problem.
  16. mdh157

    '74 new yorker brougham 440 4bbl help!!

    my $$ is on the carb as well..........
  17. mdh157

    Motor quit while driving

    I had a prob with one of my polaras where the bulkhead connector had a loose wire, it would just stop running. Once I reset the connection it was gtg
  18. mdh157

    1970 Chrysler 440 HP color?

    the good ones are too far away or too expensive
  19. mdh157

    1970 Chrysler 440 HP color?

    Dunno..........after seeing these other pics, who knows what rust/bondo is hiding under there.
Back
Top