Search results for query: *

You have a PM in your inbox..........

If the bump was intended relative to my previous post, I thought I was going to need to buy one of your distributors since I couldn't find my original one and my engine is being rebuilt currently. In looking further, I did find mine in another box unrelated to the engine, so at this time I...

Thanks for that clarification. What you are able to do is certainly impressive and you know all the resources available. Much appreciated.

Thanks for providing that comprehensive list - you have quite a selection. Just so I understand, in the 1970 model year for example, there are 4 available 3438219 distributors and the prices are $280, $325, $500 and $675. They are all rebuilt I assume to the same standards and curves given the...

Actually @Snotty is correct in that the vent hose arrangement shown on the dual snorkel above first showed up in 1971 and may have continued into later years as well, but I actually have only seen that arrangement on 71's only as far as I recall including the single snorkel in 1971 too (I have...

Please clarify whether this harness is for a Leese Neville alternator or a regular Chrysler alternator. I didn't think Chrysler alternators in 1971 were putting out 60 amps and a check of the service manual indicates Leece Neville alternators put out 51 amps while the highest output Chrysler...

Which wheels are you currently running and what brakes does it have - original 14" wheels with correct wheel covers or the 15" road wheels and what brake setup does it have? Gorgeous F and I love the color! Thanks

If your avatar car is your own Chrysler 300F, could you show us some photos of it? Welcome.

PM sent.

Just curious, why didn't you just use the Holley? When our cars were new, the Holleys ran better overall than any of the Carters, especially off the line. The Holleys had more effective pump shots and the off idle jets came in earlier and richer than the AVS carbs. To this day I am not...

Stub frames on a Chrysler and Dodge are the same in 1971 but Plymouth is different due to the shorter torsion bars. So don't get the wrong one. Here is an explanation from the previous long thread posted above on stubframes from sfgt: The V8 Frames are not all the same. The difference between...

What is your other direction?

Those vacuum amplifiers weren't used until 1973 at the earliest as I recall and certainly not on a 70 300. When the emission control systems started incorporating exhaust gas recirculation (EGR) to lower nitrogen oxide emissions, it was desirable to ramp in the EGR in proportion to the engine...

I found that 3 of my washer bottles are nos and three are repops. Two of the repops are stored in Mopar Performance Bags that they came with. So MP did repop them at one time. I will try to call them to see if they would be willing to disclose the company that did the repop for them, if it...

I got my spares from Mopar Performance many years ago now (they have been out of stock for them for a long time now too). I will have to check on the rivets to see which ones I have - NOS or repop. Not more than a few months ago Vans said they were going to work with a supplier to make these...

Actually, I have no complaints regarding the newer ones, as they run fine. The ones on my Cuda have been on there for some 25 years and except for the problems ethanol in fuel present, they have run just fine. Actually, they run really well. The accelerator pump system, while more of a leak...

Well, it wouldn't be cheap to get them to run reliably again, nor would they last long even if they were successful in the rebuilding before the air horns or something else warped. I believe I still have my original carbs, so maybe I should unload them if they are that valuable. Seems kind of...

If the 3 Holley carbs he has are originals, I would consider them worthless, as they were junk and warped early on. Plan on getting a new set of those 3 Holley carburetors that are remanufactured and to a much higher quality standard if you ever want the car to run well (and they have been...

It sounds like it is a complete 6 pack set up including carburetors that were previously rebuilt, linkage and other parts. Given the relatively few that were built in production, this price doesn't seem out of line to me at least. He really needs to include a photo of what he has, as the air...

Read this thread, as it explains it all. I bought a bunch of the Land Rover ones. They only require slight modification to work very well: Steering coupler needed BTW, there is a reference in one of the posts in that thread about me having a Bouchilin coupler for sale at one time, but that...