Search results for query: *

WTB: Rear Horizontal Bumper for 68 Imperial. Mine is damaged. What is out there? Thanks in Advance!

https://www.facebook.com/marketplace/item/383324271335411/-1968-Imperial-Crown-Coupe Seller's Description: 1968 Imperial Crown 2-door Hardtop Coupe 2 owners Driven 43,000 miles Automatic transmission Exterior color: Yellow · Interior color: White Clean title This vehicle has no significant...

World's Largest Mack Truck Is Getting a New Shot at Life After 55 Years Excerpt from the link: Tthe last surviving Mack M100SX, the largest truck ever built by the manufacturer, is being restored after decades of disuse. Normal tractors have nothing on the M100SX. It's so gargantuan and so...

Would have been a long ride home, top speed is 28.8 mph. But that last .8 mph is something else!

A good radiator shop can pressure test and or repair your heater core if needed.

Hey, I could have hired that truck for towing my RV home, before I figured out that the EGR cooler was bad. ;^)

2949240 same as 3613277 Used on B Body and C Body cars I have 17 of these. No pitting just need black paint. All have the mounting posts on the back. 20.00 for a pair plus shipping Send me a message for more info

Thanks for the link Tim. Universal hangers don't fit well w/ our 69-73 Chrysler models. The exhaust from Waldrons fit pretty well. Universal hangers were found everywhere w/ this hacked exhaust system I removed. There are some very tight clearances over the rear axle and rear bumper. Just trying...

hey 413, my car is a C body ,i didnt see 1972 C body on that link thanks

There are 2 types of pulleys. Some will be needed to just pulled of others are with a nut. Here is mine, without nut. Just pulling it of with force and a special tool. Like this

Yes, but is there a nut that requires removal before I press the pulley off?

World's Largest Mack Truck Is Getting a New Shot at Life After 55 Years The frane alone weighs over 95,000 lbs. One of three that were made.

No man, they don't make them! Aren't you listening??? I love it when someone tells you something that you know isn't true, but they insist you're wrong. Good find 413 and 67_300.

I cleaned it up again and this time filed the contact areas, like MGM86. Now it's working fine. Thx all! Here's some dirty pictures

No. No pulley included, you need to pull of the pulley with an extra tool. Needs much force. It's pressed on. I bought this one. BGS technic Riemenscheiben-Abzieher & Montage-Satz | für GM, Ford | 13-tlg. 4026947077543 | eBay I needed about 20-30min to took of the pulley and press it on to...

I rebuilt my dimmer switch for the same reason and it has been working well although I only have a hundred or so miles on the car with the lights on. I cleaned all of the terminals, the spring inside, and the little metal clip on the arm that runs along the spring. I used Gorilla glue to put...

I recently rebuilt my non-AC heater box and it wasn't too bad of a project. I would check for cracks around where the vac. actuators are riveted to the box. I repaired the cracks with fiberglass epoxy resin. Definitely recommend the gasket set from detroit muscle as posted by @3C's & a D? I...

Anyone Have A Use For These Bolts before I deep six them? Free, just pay shipping.

Show Rob this page Menu_340_Headers