Search results for query: *

While I like that choice, and have those for my Dart, I think @ayilar is after a more stock sounding exhaust.

Join me in welcoming @howhiareu_01 to FCBO.

what mufflers r u useing can i recommend flowmaster 40? mine aftr we goy i rod ready before i rebuilt the 440

And here is CH43T0C102752 -- an early-build 1970 Chrysler New Yorker 4dr hardtop

In the same vein, C423T2C226081 's papers are now on eBay. @69CoronetRT

@david hill Did you check this place? C Body Hangers, muffler and tail pipe

Hello all just wanted to update everyone on the engine question . At first i bought a 2016 hemi with low miles and after researching more detail i decided to abandon the hemi swap and go with a 408 stroker. So i sold the hemi and bought a new 408 stroker .I'm going to install a complete new...

Join me in welcoming @lcdrjyoung to FCBO.

Since I tend to take more things apart then I put back together, today I planned to take my reservoir off and replace the big main O-ring/seal. I also wanted to get a better look at the filler neck because I believe my reservoir leaks where the filler neck comes together with the reservoir body...

This is an Assorted Lot Of 1960's/70's Mopar Engine Accessories Brackets. They are all original, not china knockoffs. They are in good condition, just could use a cleanup. $45.00. Local pickup, or buyer pays shipping.

This is a OEM 1970's Small Block Throttle Return Spring Bracket. It is original, not a china knockoff. $15.00. Local pickup, or buyer pays shipping.

Does anyone know where to obtain replacement exhaust hangers like that are sold.

photos

Here are the new replacement parts. Shown are the left and right 1 piece manifold to muffler pipes. Left side was spot on. the right had to be massaged a little. It appears the correct exhaust hangers need are the same as my Hurst 300. Universal hangers were employed currently. see last 4 photos

As long as manifold is a late model it can be left alone. Only reason I don't like coming off the ballast side is, it draws a lot more amps through the ignition switch. Both are rather large amp draws. Coil is a large amp draws because only thing slowing the current is the huge number of...

Can't seem to find it in this pattern of dots and texture.

Nice bracket. Keep in mind that you'll have a challenge accessing the bracket's mounting bolt with the fender on - that's why the others all mount with the bolt on the INBOARD side of the stub frame rail. I believe you're on the right track with the port labelling, but there are others here...

Next to do was address the leak prone patched up exhaust. The cure was to install a dual exhaust kit from Waldron w/ Imperial mufflers. As you can see the present exhaust Had been patched up many times

The main thing is going to be the heater core. But I figured while I have it out I might as well go over it and check everything else out and clean it up.

What concerns are you wishing to address? New evaporator core in your stock? New heater core in your stock? Failed actuators? New blower motor? Applicable gaskets and seals? One thing I have noticed on our Chryslers is that the vac hoses to the actuators and such appear to be a...