Search results for query: *

any problems with the kit?

Ahhhh. Thanks!

This is mine. It's lit up a bit whiter because I'm using an LED bulb to keep the heat down and hopefully avoid cracking the new lens. This is the reproduction lens and ring that the 300 club sells. With a yellow incandescent bulb. They often cracked and this was my original that I made...

No need to split them, I boiled mine, greased the shaft, couple hits with a mallet, couple more hits with a deep socket and done. Alan

110 or 140? Looks like a good start. What's the plan?

I'm scanning the 1965MY Technical Service Bulletins and ran across this reference to 300Ls What does the radiator grill light assembly look like in the day and at night? Is this a large or small lamp? What does the replacement lens look like? Thanks.

If those are fr Moog, decent. Mevotech doesn't slice theirs, making it a trifle more difficult to install them. IDK who else slices theirs, or doesn't. The Mevotechs I put in my '68 are U.S.A. made, which was a pleasant surprise, though I've seen their rubber come from all over south Asia...

B-25, the most widely used of all WWII Bombers. They saw many different types of flying activities.

@SportFury70 posted that he was deleting the thread to put it on B.A.T. Hope it does better than my Monaco wagon did.

That's really all I am thinking about when looking at this reasonably. I think my blue 71 Monaco I got from California was in far worse shape and it didn't take long to sell once I had to make the tough decision to sell it. The presentation here with these photos is poor and makes the car...

I can say if I were closer as in Idaho I'd have gone up just because I could. I wouldn't have done anything with it.

After seeing the 73 police wagon suffer. It's hard to see folks dismiss cars that certainly are worth saving. I'm gonna ask some more questions and seriously consider grabbing this one up based on those answers.

PH45K3D182499 is for sale on BaT. There used to be a thread about this HL4 Plymouth, started on March 11 of this year as per my records, but it seems to have recently been removed -- the info still shows up when searching online, but not on FCBO. What gives, @SportFury70 -- is this not your car...

Oops! We ran into some problems. You have reached the limit (15) for conversations. ...not that I tried to press that contact button but I just get this message. OK. Cleaned out my message box and now it works.

Big block manifolds of the 60’s-early 70’s have flat flanges that use flat gaskets. In the mid 70s I believe they went to ball flanges. Travis..

This is a Saginaw 383/440 Power Steering Pump Front Bracket. It is original, not a china knockoff, and is in good condition. $20.00. Local pickup, or buyer pays shipping.