Search results for query: *

and plugs look great

NAPA 36756...73 fury...the drum brake hose points upward, i drilled another hole for the retaining tab on the hose bracket and rebent the metal line so the hose became more horizontal

edelbrock 650

little to no play

I understand that the son was not insured, but I apparently missed that mommy wasn’t insured as well. 9256. That is a lot of times!

I assume the seat worked prior to pulling the interior out. Are you getting any clicking like it is trying to move? Do you have a good ground? Try using the frame for a ground.

Good shape, could use a polish if you want a brite shine. $40 plus shipping

Why would it be their’s, if they don’t have any? I can say it for the 9,256th time that my neighbor is uninsured.

Your insurance or the Mom’s?

You don't mention what carb you are using. It sounds like you have a lean condition of some sort. That could be fuel delivery, or it could be that you haven't tuned the carb to your engine. The long tube headers will make the engine run lean at high RPM or wide open throttle and the carb...

So insurance has paid for work to begin. Damage is accessed at $2800 but may go up once the wrecked door is removed.

Karps can make dot approved hoses. Home - KARPS POWER BRAKE SERVICE & CYLINDER SLEEVING

I would check the clearance of the timing chain. Set the mark to TDC and then turn the crankshaft against the direction of rotation until the rotor in the ignition distributor turns. Then check how many degrees you can turn the crankshaft back until the rotor turns. I had a crankshaft of almost...

That's the original 1970 Chrysler Newport glove box door style.

Hi Aside from those few models that had parts of the brake drum painted red where it could be seen through the wheel slots, did Chrysler Corp. ever paint brake drums or were they just left to rust? Just curious, thanks.

Just to be clear - when you say you dont get them, exactly what do you mean? What do you think you should get that you arent?

This is a OEM Mopar 11 3/4" Flex Plate W/Bolts. It came out of a 1969 Dodge Coronet R/T with a 440hp engine. It is in good condition. They are not shown in the photo, but the six original attaching bolts to the crankshaft are included. $25.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Oil Pump Intermediate Shaft. It is original, not a china knockoff, and is in good condition, but as you can see in the pics, it does have a few small spots of surface rust from sitting on the shelf for many years. It fits the 350, 361, 383, 400, 413, 426, and 440...

https://www.forcbodiesonly.com/mopar-forum/threads/new-member-new-polara.52344/page-14 I posted yesterday and did not receive notifications about two posts today. This problem isn't isolated to Old threads that I have not posted in. It is widespread.