Search results for query: *

Thank you for providing data to support your claims. Looking at the link, the underlying information is from a Belgian website: New and used cars in Belgium | Gocar.be I do not know if the market shares shown above are for cars sold in the States, Europe, or Belgium because the actual data are...

i think you will see post 6 is right with float or more likely the needle and seat are leaking down.

I'm not sure I'm following you on what you mean by the "lever keeps popping out of place" but the springs all look to be in good condition. I am wondering if the screw on the left is the correct one? Is that what keeps loosening up? The correct screw will have a shank that when tightened down...

Come one come all and bring your Mopars. I’ve already registered. Tap on the flashing registration link, 20 bucks entry fee paid at the gate.. Long Island Classic Cars | Long Island's Online Home for Specialty Car Buying, Selling and Restoring...

The 300 club "International" does keep track of VINs for the various letter cars and that includes the 300Hurst. They don't publish the VINs for any of the "letters" on their website though, as I would imagine some guys wouldn't like that info to be on that level of public info. My last...

Clean and lube every moving part of the mechanism before condemning the motors. They could need work also, but a working motor is last on the list not first. When was the last time it was done? And the motor can be taken apart, cleaned and lubed at home, pretty easily done if you are handy.

https://www.facebook.com/marketplace/item/965739515186108/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A19afc2fd-b5c9-4dd7-ad77-03ba826a277a Listed 3 days ago in Redford, MI Seller's description Selling two historic vehicles. First is a 1972 Chrysler imperial...

I have a NOS gas cap 3549087. It may fit a 73 C body and maybe others?? Don`t know for sure so do you own research. $35 shipped US

you're actually one step hotter plug with the 86 calls for 85 so the plugs are not too cold. need to take it out and run it with as little idling as possible and when you get home turn it off as soon as you get in the driveway and pull one of the back plugs.

That should be a flared fitting, no seal required. Take it off and check that the flare on the fitting and on the hose aren’t damaged. When you tighten it, run it down snug and then turn the wrench one flat. Travis..

Was it running fine and then you changed something or did it act up out of the blue? I would make sure there isn’t anything wrong in the distributor, nothing seized, nothing falling apart, correct air gap on pickup coil if applicable. Double check your firing order too. Travis..

This is a Used OEM 1964 to 73 Mopar Oil Pressure Sending Unit. It has 90 stamped on the hex. This is for Mopars with a oil pressure gauge, not a idiot light. It is in good condition, just needs a cleanup. $15.00. Local pickup, or buyer pays shipping.

I looked and looked for a Hurst list of some sort, thinking the same thing you guys did. But I've come to realize that the 300 Club is not particularly fond of the Hurst. When I stopped by their gathering at Carlisle over past years, I thought they wanted to spit on me. Only Al Moon was...

Finally the stars aligned and I was able to get the cars out of the garage after what seemed to be an endless winter. It would warm up, then rain and all would be good, then it would snow and the road salt would get dumped and that would repeat itself for almost a month now. Anyway... First...

No advantage ot unhooking the vac advance line as there is no vac advance at WOT. When was the last time you replaced the fuel pump pushrod? They wear, too. Shortening the rod shortenes the stroke of the fuel pump diaphram. Result, less available fuel AND how soon the bowls get full again...

66 300 with a 383. Brand new edelbrock 650 with long tube headers, msd distributor & new plugs & plug wires. It starts & runs great. I can floor it from a stop or anything under 10 mph & it does great. As soon as you get to second gear & floor it, it backfires & sometimes wants to cut off. I’m...

They aren't real difficult to get working. Mostly it's just a dirty commutator and brushes. Power Window Motor Repair

DOOR HANDLE LINKAGE ROD CLIP 68 69 70 CHARGER GTX ROAD RUNNER SUPER BEE MOPAR | eBay NOS Mopar Dodge Plymouth Truck Van Door Latch Outside Handle Rod Clip Retainer | eBay

Those upper control arms are a mess! Wow! Regarding your issues; First thing is you are using an aftermarket upper control arm... As with a lot of aftermarket products, they don't necessarily work with C-bodies. What company made them? Same with the spindle. Was it a used replacement or...

Bayview and Eglinton in Toronto. My old neighbourhood. I worked at the Shell and the Esso station when I was a kid, Karbelt speed and custom was between the car wash and Esso.